0,00 €*
Délai de livraison env. 18-20 jours ouvrables
Vous n'avez pas trouvé ce que vous cherchiez ? Configurez votre boîte aux lettres de manière personnalisée !
Boîte aux lettres encastrée 3x2 en acier inoxydable BASIC Plus 382XU UP - RAL au choix - 3 parties
Boîte aux lettres encastrée moderne pour 3 parties - made in Germany by Briefkasten Manufaktur.
La boîte aux lettres est entièrement en acier inoxydable V2A, revêtue par poudre dans la couleur RAL. La finition de très haute qualité et le concept bien pensé font de cette boîte aux lettres encastrée notre top-seller. Cette boîte aux lettres encastrée se caractérise par un bord d'écoulement de l'eau pour une protection optimale contre l'eau, une lèvre en caoutchouc continue pour une insertion silencieuse, un porte-nom interchangeable solide, un support de courrier pratique et une serrure très robuste. Le cadre encastré en acier inoxydable V2A est équipé d'un joint en caoutchouc mousse et garantit une très grande longévité.
Les boîtes aux lettres de la collection BASIC Plus se distinguent par l'utilisation systématique d'acier inoxydable V2A. Il en résulte une très grande longévité et durabilité. La construction a été développée par nos propres ingénieurs en vue d'une grande flexibilité ou modularité, d'un montage facile des pièces de rechange et d'un auto-assemblage simple. Les pièces de rechange sont directement disponibles pour toutes les installations BASIC Plus.
- Boîte aux lettres triple encastrée entièrement en acier inoxydable V2A 1.4301, revêtue par poudre en couleur RAL.
- L'installation est réalisée chez Briefkasten Manufaktur. Fabrication de qualité allemande "Made in Germany".
- Les boîtes aux lettres sont conformes à la norme DIN/EN 13724. Taille de l'ouverture (3,5 cm x 32,5 cm) pour C4 horizontal, les grandes lettres peuvent y être insérées sans se plier.
- Porte d'introduction avec joint en caoutchouc antibruit pour une introduction très silencieuse du courrier.
- La porte s'ouvre de gauche à droite.
- Incl. 2 clés avec numéro de clé, porte-nom interchangeable (type 2) sous le clapet d'introduction et étrier de maintien du courrier.
- Grande capacité grâce à la profondeur de boîte aux lettres optionnelle +50 mm = env. 17 l. Convient aux entreprises et aux ménages qui reçoivent un très grand volume de courrier.
- Cadre de recouvrement du crépi en profilé angulaire en acier inoxydable 25 x 58 mm, revêtu par poudre dans la couleur RAL.
Information importante :
Le courrier n'est protégé de l'humidité et des salissures que lorsque l'ouverture est complète et le volet fermé. Dans certaines conditions météorologiques extrêmes, de l'eau peut néanmoins pénétrer (selon DIN EN 13724 jusqu'à 1ccm). Ceci ne constitue pas un motif de réclamation.
| Matériau de base: | Acier inoxydable V2A 1.4301 |
|---|---|
| Nombre de boîtes: | avec 3 boîtes aux lettres |
| Prélèvement de poste: | Face avant |
Briefkasten Manufaktur Lippe GmbH
Werler Str. 60
32105 Bad Salzuflen
Deutschland
info@briefkasten-manufaktur.de
| Hauteur du caisson individuel en mm: | 330,0 |
|---|---|
| Largeur du caisson individuel en mm: | 355,0 |
| Volume en litres: | 12,0 | 17,0 |
| Hauteur de la fente d'introduction du courrier en mm: | 35,0 |
| Largeur de la fente d'introduction du courrier en mm: | 325,0 |
| Hauteur de la boîte aux lettres en mm: | 710,0 |
| Largeur de la boîte aux lettres en mm: | 760,0 |
| Profondeur en mm: | 100,0 | 150,0 |
| Poids en kg: | 32 |
| État de livraison: | livré entièrement monté |
| Informations sur l'envoi: | Livraison par transporteur sur palette à usage unique. Avant la livraison, l'entreprise de transport vous contactera par téléphone pour convenir d'un rendez-vous. |
Questions fréquentes sur les boîtes aux lettres
[PDF Datei 5,2 mb]We recommend concrete foundations (B25) for free-standing systems, with the dimensions per frame side being 450 x 450 mm. For smaller systems, a continuous foundation with the following dimensions is required: system width + 450 x 450 mm. The foundation should be enlarged depending on the ground conditions. The depth of the foundation should be at least 700 mm, depending on the frost line in the soil. Before excavation, it is advisable to obtain a plan of the planned installation site from the relevant authority so that pipes, electrical cables, etc. are not damaged. Please ensure that the cables are pulled before concreting.
.jpg)
If the system is set in a concrete foundation, the depth of the embedded parts should be 350 mm - 500 mm.
If the system is screwed on to a concrete foundation, you must use bolt anchors (diameter 10 - 12 mm) or equivalent.
We recommend our cover rosettes to finish the screw connection and the transition into the ground.
Without mounting rail:
When mounting letterbox systems on house walls, the relevant recommendations of the dowel manufacturers must be observed depending on the wall condition. Furthermore, care must be taken to ensure that no cold bridges are created by the fixing screws. Use special dowels for wall insulation if necessary. To calculate the total weight of the systems, please refer to our weight specifications in the detailed information.
1. Check
The wall to which the letterbox system is to be attached must be clean and level. Ensure that the wall has the appropriate load-bearing capacity. Depending on its size, a letterbox weighs between 5 and 130 kg. 2. Measure Measure the mounting holes on the back of the system. Transfer these measurements to the wall. Please observe the installation height specified by DIN 13724. The centre line of the lowest mail slot should not be below 700 mm. The centre line of the top mail slot should not be higher than 1,700 mm. Only in exceptional cases (accessibility) are 400 mm as the lower limit and 1,800 mm as the upper limit permissible.
3. Drilling
Drill holes in the wall and insert dowels into the holes. Please note: Hole sizes and dowel types depend on the respective wall conditions and must therefore be determined on site. If in doubt, please seek expert advice on site.
4. Screw together
Open the doors of the boxes in which the mounting holes are located and insert the appropriate screws with the spacers into the wall plugs through these boxes. Screw the system together. This step is best carried out by three people.
With mounting rail:
1. Check
The wall to which the letterbox system is to be attached must be clean and level. Ensure that the wall has the appropriate load-bearing capacity. Depending on its size, a letterbox weighs between 5 and 130 kg.
2. Measure
The holes in the rail below the top edge of the letterbox must be measured in advance. To do this, place the mounting rail on the bracket from behind and measure from the top edge of the letterbox to the holes in the mounting rail. This distance must then be subtracted from the desired top edge measurement of the system.
3. Drilling
Position the supplied wall mounting rail horizontally on the wall. Please observe the mounting height specified by DIN 13724. The centre line of the lowest mail slot should not be below 700 mm. The centre line of the top mail slot should not be higher than 1,700 mm. Only in exceptional cases (accessibility) are 400 mm as the lower limit and 1,800 mm as the upper limit permissible. Now mark the drill holes with a suitable pen. Then drill suitable holes with a suitable drill bit. Finally, attach the wall mounting rail.
3. Screw in place
Now guide the letterbox onto the wall mounting rail and hang it with its mounting rail into the wall mounting rail. Check that the system is level . Now mark the holes for attaching the letterbox to the wall. Remove the letterbox from the wall again and mark the holes in the same way as you did for the wall mounting rail. Now hang the letterbox back onto the wall mounting rail. Open the doors of the boxes containing the mounting holes and insert the appropriate screws into the dowels through these boxes.
Our in-wall systems are equipped with pre-cut cable inlets on all sides, which can be easily removed if necessary. We recommend having the in-wall system installed by a professional, as installing systems in house walls can create thermal bridges if the insulation layer is interrupted during installation.
1. Measure height and width
Measure the exact width and height from the back of the letterbox system. This is important because you need the dimensions without the plaster cover frame. Add a total of approx. 20 mm to these dimensions in both height and width and then draw a rectangle on the wall in which the system is to be installed using these dimensions. Please note the installation height prescribed by DIN EN 13724. The centre line of the lowest insertion opening should not be below 700 mm, and the centre line of the highest insertion opening should not be higher than 1,700 mm. Only in exceptional cases are 400 mm and 1,800 mm permissible as the lower and upper limits.
2. Measure depth
Now measure the overall depth of the letterbox system and add a further 5 to max. 10 mm.
3. Break out niche
Then break out a niche in the wall within the marked rectangle and to the depth of the system.
4. Fit the system
Then carefully fit the system into this niche and, if necessary, correct the niche size.
5. Drill
Bring the system into its final position and mark the drill holes on the wall. Remove the system from the niche and drill the corresponding holes in the back wall of the niche and insert the wall plugs into the holes. Caution: The size of the holes and the type of wall plugs depend on the respective wall properties and must therefore be determined on site. If in doubt, please seek expert advice on site. Tip: The system can also be attached via the side panels.
6. Screw
Now reintroduce the system into the niche, open the doors of the boxes containing the mounting holes and insert the appropriate screws into the dowels through these boxes. Screw the system together. Make sure that the plaster frame completely covers the niche.
To achieve optimal water protection for your post, the system/letterbox should be equipped with the above-mentioned panels or a rain canopy. If possible, the letterbox or letterbox system should be located under a canopy. The post is only protected from water when it is completely placed in the box and the flap is closed. If mail is not fully inserted, moisture and dirt can get into the letterbox. It is therefore necessary to plan sufficiently dimensioned letterboxes for the upcoming demand. We offer extra letterbox depth for increased mail volumes, and we are also happy to manufacture individual special sizes. However, water can still enter the letterbox under certain extreme weather conditions (according to DIN EN 13724 up to 1ccm). This is not a reason for complaint.
Installation direction
In a letterbox system, the post is protected from wind and weather. However, when installing a free-standing system, make sure that the insertion front is not directly facing the weather side, in line with good craftsmanship tradition.
Our complete sets are usually ready for connection! We already program the complete sets at our factory.
However, we always recommend having the electrical installation carried out by an electrician. Please always refer to the operating instructions provided by the manufacturer for wallboxes, intercoms and video systems!
Camera, intercoms or wallbox preparation
We offer preparation of cameras, intercoms and wallboxes from various manufacturers for our systems. The preparation does not include any end devices; it involves the provision of the screw fittings, drill holes and perforations. This means that you can easily mount your end device.
General warnings
Our light and bell modules, as well as our light and bell push buttons, may only be operated at a maximum of 12-24 volts! A transformer with VDE certification must be used! Higher voltages can endanger human life and will void the warranty. Only components with a 100% permissible duty cycle may be connected to the buttons and modules! Failure to observe this warning may result in: - fire hazard - personal injury - destruction of components. Electrical devices may only be installed and assembled by a qualified electrician! Please check whether the power consumption of the standard power supply unit is sufficient for your planned connection (e.g. for bell, intercom, light control as well as cable length and cross-section).
Light/bell push DESIGNER
Light/bell push as a single push-button is used to switch on the lighting in the entrance area and/or a stairwell or to operate a signal generator.
Terminal L1/L2 = LED - illuminated ring 5-24V AC/DC
Terminal C/NO = contactor
Current consumption approx. 40mA
Switching capacity max. 50mA @ 50V DC 1W
Light/bell push button BASIC
Light/bell push buttons as single push buttons are used to switch on the lighting in the entrance area and/or a stairwell or to operate a signal generator.
Terminal +/- = LED illuminated ring 3-24V AC/DC, LED illuminated ring ‘light’ 6-36V 110V/220V AC/DC
Terminal NC/NO = contactor
Current consumption approx. 20mA
Switching capacity max. 5A @ 250V AC
LED light
Please note that our LED lights, if they have not been completely pre-wired and connected by us, may only be operated at 12 volts DC. Other voltages will destroy the LED light and shorten its lifespan.
Attention: Always ensure the correct polarity
If your letterbox is in its original packaging, your keys are in the letterbox (take them out through the insertion slot) or in the enclosed bag (this also contains the assembly aid and other small parts). Every letterbox that leaves our premises is carefully checked and packed. A declaration of care is enclosed by the employee who manufactured your new product. If you still cannot find your key, please feel free to contact us.
DIN EN 13724
When planning a letterbox system, you should always observe the currently valid DIN EN 13724 (also known as the ‘letterbox standard’) so that you or your tenant do not have any problems receiving post.
DIN EN 13724 guarantees you:
• Easy mail delivery without bent letters or personal collection at a post office, e. B. for large DIN C4 envelopes
• Sufficient storage space for higher mail volumes
• No hassle with wet mail
• Best quality through specified and tested materials
• Security against rent reductions through standardised letterboxes
Our products are usually all tested according to this standard and marked accordingly. Only a few do not meet this standard. Find out more
Information about DIN formats that fit into the corresponding letterbox slot is cropping up more and more often. Here is a brief overview of the dimensions of the most common formats:
DIN A5: 148 x 210 mm
DIN A4: 210 x 297 mm
DIN A3: 297 x 420 mm
DIN B5: 176 x 250 mm
DIN B4: 250 x 353 mm
DIN B3: 353 x 500 mm
DIN C5: 162 x 229 mm
DIN C4: 229 x 324 mm
DIN C3: 324 x 458 mm
1.4301 is characterised by its good weldability with electrical processes. Even without heat treatment, the steel is corrosion resistant due to its low carbon content. The carbon content must be below a percentage of 0.08, although values below 0.05% are now common in practice. It can also be polished very well and is flexibly formable. It is approved for temperature stresses of up to 600 °C. Its high-quality appearance is particularly appreciated when polished.
X5CrNi18-10 is a relatively soft, nickel-containing, non-ferromagnetic austenitic steel. To keep the material rust-free and scale-resistant, 1.4301 contains a minimum of 13% chromium.
We now use 1.4301 stainless steel for the majority of our products. Compared to galvanised steel, this has the advantage of increased durability and sustainability. Our claim for a manufactured product is that it lasts a lifetime.
The material 1.4016 is part of the stainless steel group and is also known under the designation AISI 430 or X6Cr17.
This is referred to as ferritic steel and has a maximum chromium content of 18% (minimum 16%). Ferritic steel is highly magnetic, unlike austenitic steel grades. The special property of stainless ferritic chromium steel lies in its ferritic microstructure. This is what makes 1.4016 resistant to stress corrosion, which is usually the critical point in austenitic stainless steels. The drawback is the poor weldability of the material.
The material is characterised by its good bending, deep-drawing and polishing properties. Its insensitivity to stress corrosion cracking and its basic resistance to alkaline solutions, moisture or diluted organic acids, for example, should also be emphasised. It is not resistant to corrosion in salt water.
We now use 1.4016 stainless steel for the majority of our powder-coated products that do not require welding. Compared to galvanised steel, this has the advantage of increased durability and sustainability. Our claim for a manufactured product is that it will last a lifetime.
Powder coating is a tried and tested method of refining our surfaces. In this process, electrostatically charged powder coatings are applied to the respective workpieces using a spray gun. The parts then pass through a conveyor system to be baked in the oven. At temperatures of around 180° Celsius, the structures of the powder and the coated surface bond with each other. The heating process gives the powder a high-quality, smooth or evenly structured surface. We powder-coat metal parts such as steel, stainless steel, aluminium or other electrically conductive materials.
The advantages of powder coating include high corrosion protection and strong resilience. Coated parts are impact and scratch resistant, as well as resistant to chemicals and weathering.
Powder coating is a particularly environmentally friendly surface treatment technique, because no solvents or thinners are used in powder coatings. In addition, the powder coating process saves resources because the excess paint that is applied can be reclaimed.
We use both terms interchangeably, so the abrasive rating of our products always corresponds to 240 grit. This number indicates the roughness/grain size of the abrasive. The surface is matt.
Téléchargements
A commander en même temps
La manufacture de boîtes aux lettres - une tradition depuis 2003
Chez Briefkasten Manufaktur, vous pouvez commander votre boîte aux lettres, votre boîte aux lettres sur pied ou votre ensemble de boîtes aux lettres avec d'innombrables adaptations directement dans la boutique ! Pour ce faire, Briefkasten Manufaktur utilise exclusivement des installations, des composants & des pièces détachées de fabricants renommés d'Allemagne. Mais notre service clientèle ne s'arrête pas à votre commande : après votre commande, vous recevrez le cas échéant un plan de construction par e-mail au format PDF, afin de réaliser vos souhaits jusque dans les moindres détails. Vos souhaits sont alors pris en compte en détail, i.d.R. même les souhaits spéciaux qui dépassent notre offre de configuration peuvent être réalisés. Une fois que vous avez donné votre accord pour la production, votre boîte aux lettres est fabriquée de manière entièrement personnalisée et livrée confortablement par colis. Là encore, le service clientèle ne s'arrête pas là : nous veillons à ce que les boîtes aux lettres en acier inoxydable, les systèmes de boîtes aux lettres, les sonnettes et les luminaires vous soient livrés en parfait état grâce à un emballage adapté.
Et si un produit acheté ne vous plaît pas ou ne répond pas à vos attentes, vous ne courez aucun risque en tant que consommateur. Vous pouvez nous retourner nos produits dans un délai de deux semaines.
Boîtes aux lettres en plus de 80 couleurs
Chez Briefkasten Manufaktur, vous pouvez choisir parmi plus de 80 couleurs ou la couleur de votre choix sous forme de code couleur RAL. En plus d'une large gamme de couleurs, nous proposons également des finitions premium pour un look encore plus beau.
Boîtes aux lettres design. Variabilité grâce à la fabrication individuelle.
Chaque produit de la Manufacture de boîtes aux lettres est une fabrication unique et n'est fabriqué à la main pour vous qu'après votre commande. Beaucoup de nos produits peuvent ainsi être commandés directement dans la boutique avec d'innombrables adaptations. Cela est possible grâce à la structure modulaire, à la préfabrication flexible, au stockage et à la logistique. Certains éléments sont déjà préfabriqués, ce qui permet d'atteindre des délais de livraison parfois très courts.
Un montage simple grâce à une construction bien pensée
Nos installations de boîtes aux lettres sont livrées avec une documentation ou des aides au montage détaillées et faciles à comprendre et sont généralement entièrement montées en très peu de temps.
