Robust stainless steel mounting columns
The side wall fixing is via Ø 60.3 mm columns made of stainless steel V2A 1.4301 with a 240-grit brushed finish. They create a stable and durable connection between the mailbox system and the building wall.
From €1,659.00
Production and delivery approx. 6 - 7 weeks
Have you not found anything suitable? Configure your letterbox to meet your individual requirements!
The BASIC Plus 385XW is a high-quality stainless steel mailbox system for side wall mounting for 10 households. It was developed for apartment buildings and larger properties with ten separate units and enables space-saving installation to the side of the front door or on a suitable wall surface.
The 1×10 arrangement groups ten separate mailboxes into a very slim multi-occupancy system for side wall mounting.
The mailboxes are made of stainless steel V2A 1.4301 and are powder-coated in a RAL or DB colour of your choice. The rain hood and side cladding are also made of stainless steel. The side fixing is carried out via stainless steel columns of Ø 60.3 mm with a 240-grit brushed finish.
In this item variant the box position is on the left. The side arrangement creates a clear mounting edge and makes it possible to align the mailbox system to suit the structural situation at the entrance.
The side wall fixing is via Ø 60.3 mm columns made of stainless steel V2A 1.4301 with a 240-grit brushed finish. They create a stable and durable connection between the mailbox system and the building wall.
The 385XW is mounted to the side of a suitable house wall. The box position of this variant is left; this allows the system to be adapted precisely to the existing entrance situation.
Mailboxes, cladding and fastening elements consistently use stainless steel V2A 1.4301. The powder-coated mailboxes combine a high-quality surface with a durable construction.
Each compartment has an insertion opening measuring 35 × 265 mm for DIN C4 portrait. A noise-damping rubber lip reduces the impact noise of the letter flap.
Ten mailboxes conforming to DIN EN 13724 are combined into a slim, robust BASIC Plus multi-occupancy system. The modular BASIC Plus construction also facilitates maintenance and replacement part installation.
The wall must be clean, even and sufficiently load-bearing for the weight of the complete mailbox system. Anchor bolts or coach screws are not included and must be selected to suit the wall construction, system weight and local mounting conditions.
Mail items must be fully inserted so that the letter flaps can close. The insertion front should, if possible, not be directly exposed to the prevailing weather. Under extreme weather conditions, moisture may penetrate despite norm-compliant construction.
Stainless steel V2A is low-maintenance and durable. The modular BASIC Plus construction has been designed for uncomplicated installation and good availability of spare parts.
| Material: | Stainless steel V2A 1.4301 |
|---|---|
| Number of boxes: | with 10 letterboxes |
| Removal of mail: | On the front |
Briefkasten Manufaktur Lippe GmbH
Werler Str. 60
32105 Bad Salzuflen
Deutschland
info@briefkasten-manufaktur.de
WEEE-Reg.-Nr. DE 24652177
| Height in mm: | 1260 |
|---|---|
| Height of single box in mm: | 110.0 |
| Width of single box in mm: | 300.0 |
| Capacity in litres: | 12 |
| Height of letterbox slot in mm: | 35.0 |
| Width of letter slot in mm: | 265.0 |
| Height of letterbox in mm: | 1100.0 |
| Width of letterbox system in mm: | 300.0 |
| Total width in mm: | 400.0 |
| Depth in mm: | 435.0 |
| Weight in kg: | 55 |
| Delivery condition: | Delivery is made in sections; freestanding elements / mailbox delivered in parts. |
| Shipping information: | Depending on order volume, delivery is made by parcel delivery or as bulky goods. Partial deliveries are possible for products supplied in parts (e.g., for freestanding letterboxes the stand and the box may be shipped separately). |
Downloads
A mailbox or mailbox system should not only fit on the day it is installed. That is why we combine product development, metalworking, installation and service with manufacturing that allows many individual adaptations.
The Briefkasten Manufaktur has been family-run since 2003. A large proportion of our products is produced by hand in Bad Salzuflen, supported by modern manufacturing technology. This keeps planning, production and points of contact close together – from the first product comparison to spare parts or a later extension.
Manufacturing includes, among other processes, laser cutting, press braking, welding, laser marking, powder coating and assembly of modules. The short distance is particularly important to you: questions about dimensions, construction, labelling or technical integration can be addressed directly with the product knowledge from development and production.
Especially with mailbox systems, bespoke sizes and entrance systems, careful planning helps to avoid later compromises in installation, appearance and operation.
Many of our mailboxes and mailbox systems can be configured in numerous RAL colours. Depending on the series, different dimensions, numbers of boxes, labellings, house numbers, newspaper compartments as well as doorbell and door communication modules are also possible.
Which options are available depends on the specific product. For requirements outside the offered configuration, we review bespoke requests on a project basis.
A good entrance solution does not end with the order. Clear planning, reachable contacts and available spare parts help to make sensible long-term use of the system.
For project-specific systems, drawings and coordination can help to define dimensions, arrangement and special requests clearly before production begins.
For questions about variants, installation or later changes, our team in Bad Salzuflen is available as a direct point of contact.
Locks, nameplates and other components should not automatically make replacement of the entire system necessary.
If a standard version does not suit the building, we examine on a project basis which adjustments are technically and aesthetically feasible.
BASIC is designed for a wide selection of designs, sizes and fittings. Which combination is available always depends on the specific product.
BASIC combines a solid, everyday-suitable construction with a wide range of variants. The series is particularly suitable when the number of households, mounting type, colour and fittings are to be chosen to match the building without unnecessary planning complexity.
Yes. Depending on the model, BASIC offers systems for a small or large number of households and is therefore particularly interesting for apartment blocks, rental properties and multi-unit buildings. Decisive factors are the required number of boxes, the expected post volume and the available installation space.
The BASIC product family includes, depending on the model, surface-mounted, flush-mounted, free-standing, through-wall and fence solutions. This allows the mailbox system to be planned for wall, property boundary or building envelope to suit the installation situation.
Depending on the BASIC model, powder-coated galvanised steel, stainless steel and various RAL colours are available. Box dimensions and volumes also differ. Therefore, when choosing, always check the specific compartment size and the expected post volume in addition to the appearance.
Selected BASIC versions can include doorbell and light buttons, intercom stations, camera preparations, parcel compartments, newspaper shelves or other functional modules. Which technology can be integrated or prepared depends on the respective model.
Conformity to the standard is product-specific. Many BASIC mailboxes are declared accordingly; the decisive information is on the respective product page. There you will also find insertion size, compartment dimensions and further technical data for the specific version.
Depending on the product, classic mailbox locks and selected digital solutions are available. For many typical wear and replaceable parts such as locks or nameplates there are matching spare parts; Briefkasten Manufaktur specifies a ten-year spare parts availability for its products.
Please describe the building, desired construction type, number of users and special functions. We will check which mailbox or entrance solution can be implemented sensibly from a technical perspective.