Which audio component suits my door intercom?
In a door intercom system, loudspeaker and microphone usually operate as part of a coordinated communication system. Therefore not every audio module is compatible with every door station or indoor station.
First check the manufacturer and the system family. Afterwards you can decide whether a single built-in loudspeaker, a modular speech module, a rear-mount audio unit or a complete intercom set is required.
Especially when integrating into a BML doorplate or mailbox system, installation space, speaking aperture, doorbell pushbuttons and the number of call destinations are additionally relevant.
Built-in loudspeaker, speech module or intercom set?
The products in this category fulfil different roles. Which type makes sense depends on whether you want to build an individual front, use a modular system or require a complete audio system.
| Design | Function | Typical application | Also check |
|---|---|---|---|
| Built-in loudspeaker | provides speaking and listening functionality behind a designated front panel | mailbox systems, doorplates, speaking compartments and customised door stations | control unit, doorbell pushbuttons, indoor station and system compatibility |
| Modular speech module | audio communication within a modular door station | for example Gira System 106 | door station module, call button, camera, system devices and housing |
| Rear-mount audio module | loudspeaker and microphone sit behind a custom-made front | BML mailbox systems and door station fronts with external doorbell pushbuttons | adapters, pushbutton interface, indoor station and power supply |
| Intercom set | combines several components required for audio door communication | a jointly planned system for one or several residential units | compare the exact scope of delivery and the required mounting parts |
| Expansion module | extends a designated audio unit with additional call options | systems with multiple doorbell pushbuttons or multiple call destinations | maximum number of call destinations and manufacturer approval |
When is a built-in loudspeaker sensible?
A built-in loudspeaker is particularly interesting if no finished visible door station cover is to be used and the intercom technology is intended to sit behind a customised front.
The Gira built-in loudspeaker 125800 is, for example, intended for mailbox systems, speaking compartments, door-side installations and front plates. The loudspeaker and microphone form the external speaking station of the Gira 2-wire system.
Up to eight mechanical doorbell pushbuttons can be connected directly at the device. For more call points an expansion module is available within the system.
How are external doorbell pushbuttons connected to a built-in loudspeaker?
In BML entrance solutions the doorbell pushbuttons are often located separately in the metal front. The audio unit behind them must be able to technically process these external call buttons.
Direct pushbutton connection
Some built-in loudspeakers already have inputs for mechanical doorbell pushbuttons. With the Gira 125800, for example, up to eight pushbuttons can be connected directly.
Pushbutton interface
Other system solutions require a separate interface. For COMELIT Ultra, for example, a suitable pushbutton interface is used for external BML pushbuttons.
What does rear-mount mean for a door intercom?
In rear-mount installations the actual intercom technology is located behind a BML metal front. Visible from the outside are the speaking aperture, doorbell pushbuttons, name fields and other desired control elements.
The current COMELIT Ultra audio module EU2010 combines an omnidirectional digital microphone with two loudspeakers and operates within a COMELIT 2-wire system.
In the BML version it is offered with a suitable adapter for rear-mounting in panels and mailbox systems. Additional system components may be required for external doorbell pushbuttons and internal communication.
What is the difference between Gira built-in loudspeaker and speech module?
| Gira solution | Construction | Typical application |
|---|---|---|
| Built-in loudspeaker 125800 | compact speaking and microphone unit that sits behind a separate front | customised mailbox systems, doorplates and speaking compartments |
| System 106 speech module | visible module within the modular Gira System 106 door station | modularly constructed System 106 outdoor station |
| System 106 IP speech module | network-based speech module with PoE within the IP variant | newly planned IP-based System 106 door communication |
2-wire speech module or IP audio module?
2-wire / BUS
Manufacturer-bound 2-wire systems transmit communication and system signals via the designated bus line.
This can be interesting during renovations if existing suitable doorbell cabling can be reused.
IP / LAN
IP-based speech modules are integrated into the network structure. Depending on the device, data and power supply can be transmitted via Ethernet or PoE.
This solution is particularly suitable for appropriately planned, networked building installations.
What does a Busch-Jaeger built-in audio module offer?
The Busch-Welcome built-in audio module is intended as a speaking and receiving unit for suitable door and mailbox systems.
It has inputs for up to eight doorbell pushbuttons as well as interfaces for a button expansion and a suitable camera module.
This allows an initially audio-only solution to be expanded within the intended system. Which additional modules are required depends on the planned installation.
When is an intercom set sensible?
A complete set is particularly interesting when audio door communication is being newly installed and several required components are to be selected together.
New system
For a new system, a coordinated set of external intercom technology, power or control unit and suitable indoor stations can simplify the selection.
Extend existing system
If a compatible system is already in place, often only a specific module, an additional indoor station or an expansion for more call destinations is required.
What is important for an audio door intercom serving multiple apartments?
In a multi-tenant system, doorbell pushbuttons, the external speaking station and indoor stations must be clearly linked to each other.
Four planning points
- Determine number of call destinations: How many apartments or call destinations are required?
- Define doorbell pushbuttons: Check how many external pushbuttons can be connected directly or via an expansion module.
- Assign indoor stations: Each apartment needs the system-appropriate calling and speaking station.
- Dimension system devices: Choose power supply, control unit and expansion modules appropriate to the system size.
Audio intercom or video door communication?
Audio is sufficient
If visitors reliably ring and can speak with the interior, a purely audio system is often sufficient.
It does not require a camera and can therefore be built in a technically and aesthetically more streamlined way.
Camera image desired
If the visitor should also be visually identified before opening, an appropriate video system solution must be planned.
View camera components →Integrating intercom technology into metal design
At BML audio door communication is not viewed merely as a single electrical device. It can be constructively integrated into mailboxes, doorplates, door stations and freestanding entrance solutions.
This enables a clear front design: speaking apertures, doorbell pushbuttons, name fields, house number and other functions can be coordinated already during the metal fabrication.
Depending on the system, the visible manufacturer technology can be deliberately used or the audio unit can be mounted as a rear-mount behind a custom-made stainless steel or RAL front.
This precise combination of system technology and our own metal fabrication is the central advantage compared with a subsequently mounted standard intercom.
Further areas of door communication
Door station
Complete external station with doorbell pushbutton, speaking function and depending on the variant a camera.
View door stations →Indoor station
Indoor station for answering door calls, speaking and, depending on the system, for door release.
View indoor stations →System devices
Power supplies, control units, gateways and interfaces appropriate to the chosen audio door communication.
View system devices →Mounting parts
Housings, adapters and other components for the constructive installation of the system technology.
View mounting parts →Who should install built-in loudspeakers and speech modules?
Audio door communication is part of an electrical or networked building installation. Connection and commissioning depend on the respective manufacturer system.
Bus wiring, power supply, control unit, doorbell pushbuttons, door opener and indoor station must be wired and configured correctly. Installation should therefore be carried out by qualified professionals in accordance with the manufacturer documentation.
Frequently asked questions about loudspeakers and speech modules for door intercoms
What is a built-in loudspeaker for a door intercom?
A built-in loudspeaker is a compact speaking and receiving unit that is mounted behind a designated front panel. This allows customised door or mailbox fronts to be used.
Does a built-in loudspeaker also include a microphone?
The built-in audio modules offered here are complete speaking and receiving units. Depending on the manufacturer, the loudspeaker and microphone are already part of the module.
Can I connect any loudspeaker to any door intercom?
No. The audio unit must match the door communication system family used. Gira, COMELIT and Busch-Jaeger each use their own technical systems and components.
What is the difference between a speech module and a built-in loudspeaker?
A built-in loudspeaker is usually mounted concealed behind a customised front. A speech module, by contrast, is often a visible component of a modular door station system.
How many doorbell pushbuttons can be connected to a built-in loudspeaker?
This depends on the respective system. The Gira built-in loudspeaker 125800, for example, has connections for up to eight mechanical doorbell pushbuttons. Expansion modules are available for larger installations.
Can an audio door intercom be expanded later with a camera?
For systems designed for it, a later video expansion is possible. The camera module, control unit, indoor station and existing system technology must be compatible.
What does rear-mount mean in an intercom?
In a rear-mount installation the actual audio unit sits behind a custom-made metal front. Only the necessary speaking apertures and control elements remain visible from the outside.
Can an existing doorbell cable be used for a 2-wire intercom?
With suitable systems and technically appropriate existing cabling, an existing doorbell cable can be reused. Whether this is possible must be checked for the specific installation.
Do I also need an indoor station?
For internal communication a counterpart appropriate to the system is required. This is typically an indoor station or another expressly supported system solution.
We help select the suitable intercom technology
Tell us the manufacturer and desired system, number of call destinations and installation situation. For existing systems photos and type designations of the existing external and indoor stations are helpful. For new BML systems the speaking aperture, doorbell pushbuttons and system technology can be planned together with the metal front from the outset.
