What distinguishes a BML outdoor table?
The table category is deliberately focused: at its centre is the NOVALIS table as a robust outdoor furniture solution for private and commercial areas. Instead of many similar models, size, finish and installation can be specifically matched to the location of use.
NOVALIS is manufactured from stainless steel V2A 1.4301 and oiled Douglas fir. The side panels are made from 6 mm thick stainless steel plates, the wooden planks have a cross-section of 60 × 40 mm. The table is intended for exposed outdoor areas and can be combined with matching benches and stools to create a cohesive outdoor furnishing.
1500, 1800 or 2000 mm – which table size fits?
All current NOVALIS table variants have a height of 750 mm and a depth of 900 mm. The width is chosen according to the available area, intended use and the seating planned for it.
| Table width | Overall dimensions | Typical application |
|---|---|---|
| 1500 mm | 1500 × 750 × 900 mm | Compact solution for terraces, smaller break areas or limited site spaces. |
| 1800 mm | 1800 × 750 × 900 mm | Balanced size for company areas, hotels, residential complexes or larger private outdoor areas. |
| 2000 mm | 2000 × 750 × 900 mm | More table surface for heavily used communal zones and generous outdoor areas. |
Brushed stainless steel or RAL colour?
Both versions use the same robust stainless steel base. The decision mainly affects the visible effect and coordination with the architecture and existing outdoor furniture.
Use freestanding or fix permanently by screwing down
For NOVALIS, side panels are available with base plates for screw mounting or support feet for freestanding use. Which solution is more sensible depends on the substrate, the intended use and whether the location may be changed later. In publicly accessible or heavily frequented areas, permanent fixing can be particularly advisable.
Douglas fir changes under weather exposure. Without regular maintenance, the surface will develop a silvery-grey patina over time. If you wish to preserve the original wood tone for longer, you should clean and re-oil it as appropriate. Brushed stainless steel surfaces can be cleaned and maintained with suitable stainless steel care products.
A practical advantage of the constructive design: individual wooden planks can be replaced if required. This means that local damage does not automatically necessitate replacing the entire table.
Quick checks before ordering
- Which table width fits the available area?
- Which benches or chairs will be used around the table?
- Should the table be screwed down or placed freestanding?
- Does brushed stainless steel or a RAL colour suit the site better?
- Is regular wood maintenance possible and desired at the location?
- Are special dimensions, a different wood species or project-specific adjustments required?
Coordinate table, bench and surroundings
The NOVALIS table is particularly interesting when more than a single piece of furniture is sought. Stainless steel finish, wood and RAL colour can be planned together with benches and other elements of the outdoor area.
Matching benches
NOVALIS benches use the same material combination of stainless steel and wood. This allows a visually cohesive seating group to be planned for communal areas.
View outdoor benches →Add waste containers
For company, hotel or public seating areas, a waste container can be part of the same planning. Stainless steel and RAL colours can be coordinated visually.
View waste containers & bins →Frequently asked questions about outdoor tables made of stainless steel and wood
Is the NOVALIS table suitable for an exposed outdoor area?
Yes. The NOVALIS table is intended for outdoor use and combines stainless steel V2A 1.4301 with oiled Douglas fir. As with any wood used outdoors, the surface changes due to sun, rain and temperature fluctuations and should be maintained according to the desired appearance.
What sizes are available for the NOVALIS outdoor table?
Currently 1500, 1800 and 2000 mm table widths are available. The table height is 750 mm, the depth 900 mm. For project work, different dimensions can be requested and technically reviewed.
Is the table available in RAL colour?
Yes. The stainless steel parts are optionally available with a 240-grit brushed finish or powder-coated in RAL colour. This allows the table to be coordinated, for example, with the façade, benches, lights or other metal components.
Can the table be fixed to the ground?
Yes. Depending on the version, base plates for screw mounting or support feet for freestanding installation are provided. The appropriate variant should be chosen based on the substrate, use and desired flexibility of the location.
How should Douglas fir be maintained outdoors?
The wooden surfaces should be cleaned regularly and re-oiled if necessary. Without re-oiling, Douglas fir develops a silvery-grey patina over time. This is a natural visual change in the wood and does not mean the table is no longer usable.
Are special dimensions or other wood species possible?
For project work, special dimensions and further design requests can be made. Depending on the project, other wood species such as walnut, oak or FSC® 100%-certified hardwood can also be used. The technical feasibility is assessed on a project-by-project basis.
Can the table be combined with matching benches?
Yes. The NOVALIS benches adopt the stainless steel, wood and the table’s straightforward design language. This enables cohesive seating areas to be planned for terraces, businesses, hotels, residential complexes or publicly accessible spaces.
Size, RAL colour or special solution still undecided?
Please let us know the intended location, desired table size, finish, fixing method and quantity. For contract projects we can also examine special dimensions, alternative timber species and further design adjustments.
