Skip to main content Skip to search Skip to main navigation
Menu
6771a3084d3719bbffc11931699190f666501a04
Correctly match insert, holder and model

Select the correct replacement nameplate for your BML mailbox

If only the name needs to be changed, a suitable nameplate insert is often sufficient. If the holder is damaged or you wish to change the design, a complete nameplate may be required. The mailbox model, plate type and the correct measurements are decisive.

Stainless-steel nameplate insert as a spare part for BML mailboxes
Replace only the insert If the nameplate holder is intact, replace just the insert
Select by model BASIC, BASIC Plus, GOETHE, STORM and other series
Multiple nameplate systems Type 2, Type 3, security and stainless-steel versions
10 years' spare parts availability BML service for long-term product use

Filter products

36 Products
Configurator
Unbeschriftete, rechteckige Namensschildeinlage aus geschliffenem Edelstahl in Schrägansicht, 55 × 13 mm, 1 mm stark, für BASIC 380–384 und 862–863 von Briefkasten Manufaktur.

Average rating of 5 out of 5 stars

Selbstklebendes Namensschild aus geschliffenem Edelstahl mit grauer Aufschrift „Bitte keine Werbung“ in Arial, in Schrägansicht auf weißem Hintergrund.

Average rating of 5 out of 5 stars

Configurator
Unbeschriftete, rechteckige Namensschildeinlage aus geschliffenem Edelstahl in Schrägansicht, 55 × 13 mm, 1 mm stark, für BASIC 380–384 und 862–863 von Briefkasten Manufaktur.

Average rating of 5 out of 5 stars

Configurator
Rückseite des flächenbündigen Namensschilds für BASIC Briefkästen: Edelstahl-Trägerblech mit umlaufenden roten 3M-VHB-Klebestreifen zur Befestigung.

Average rating of 4 out of 5 stars

Configurator
Gira System 106 Ruftaste aus geschliffenem Edelstahl mit schwarzem Klingelsymbol links und der Laserbeschriftung „Joachim Kühler“ rechts.

Average rating of 5 out of 5 stars

Selbstklebendes Piktogramm „PAKET“ aus geschliffenem Edelstahl: stilisiertes Paket mit Aussparungen auf weißem Hintergrund, zur Kennzeichnung von Paketfächern.

Self-adhesive pictogram "PAKET" - polished stainless steel

Colour: Stainless steel, brushed

Regular price: €14.90
Sicherheits-Namensschild Typ 1 von Briefkasten Manufaktur mit grauem Kunststoffrahmen und transparentem, herausgenommenem Namensschildeinsatz für Briefkastentüren und Klingeltableaus.

Safety nameplate type 1

Regular price: €24.90
🎨 COLOUR CHOICE
Configurator
Unbeschriftete, rechteckige Namensschildeinlage aus geschliffenem Edelstahl in Schrägansicht, 55 × 13 mm, 1 mm stark, für BASIC 380–384 und 862–863 von Briefkasten Manufaktur.

Average rating of 5 out of 5 stars

Stainless steel nameplate 57x15x1mm for DoorBird call button D21x

Colour: Stainless steel, brushed

From €29.00
Selbstklebendes Piktogramm „BRIEF“ aus geschliffenem Edelstahl in Form eines Briefumschlags mit abgerundeten Ecken zur Kennzeichnung von Briefkästen.

Self-adhesive pictogram "BRIEF" - polished stainless steel

Colour: Stainless steel, brushed

Regular price: €14.90
Configurator
Unbeschriftetes, flächenbündiges Namensschild für GOETHE Briefkästen aus gebürstetem Edelstahl mit rechteckigem Trägerblech und zwei Befestigungsbohrungen.
Configurator
Flächenbündiges Namensschild DESIGNER 100 × 32 mm aus pulverbeschichtetem Edelstahl V2A in dunkler Frontplatte mit heller Laserbeschriftung „Briefkasten Manufaktur Lippe GmbH“.

Name badge DESIGNER 100x32mm

Colour: 🎨 RAL colour of your choice

From €84.90
Configurator
Unbeschriftetes, selbstklebendes Namensschild aus geschliffenem Edelstahl mit rechts spitz zulaufender Kontur, 174 × 46,5 mm, für den Briefkasten.
Flächenbündiges DESIGNER-Namensschild aus weiß hinterlegtem Plexiglas, 44 × 32 mm, mit Beispielbeschriftung „Familie Becker“ in einer gebürsteten Metallfront.

DESIGNER plexiglass name badge (white backing) 44x32mm

Regular price: €29.00
🎨 COLOUR CHOICE
Configurator
Unbeschriftetes, rechteckiges Namensschild aus geschliffenem Edelstahl, 42 × 15 × 1 mm, für die DoorBird Ruftaste D11x, schräg auf weißem Hintergrund dargestellt.

Stainless steel nameplate 42x15x1mm for DoorBird call button D11x

Colour: Stainless steel, brushed

From €29.00
Configurator
Flächenbündiges Namensschild DESIGNER 44 x 25 mm aus geschliffenem Edelstahl V2A, in eine Edelstahlfläche eingesetzt und mit dem Namen „Schmidt“ beschriftet.

Name badge DESIGNER 44x25mm

Colour: Stainless steel, brushed

From €49.00
🎨 COLOUR CHOICE
Beschriftungsschild aus geschliffenem Edelstahl mit der Aufschrift „Brandenburger Allee 60“, oben auf einer grauen Briefkastenanlage montiert.

Labelling plate for letterbox systems - 300mm - polished stainless steel

Size: Width 300mm Colour: Stainless steel, brushed

Regular price: €149.90
Configurator
Gira System 106 Ruftaste aus geschliffenem Edelstahl V2A in Frontansicht mit länglichem, unbeschriftetem Beschriftungsfeld zur Beleuchtung für die Türstation.
Identify first, then replace

Which replacement nameplate fits my mailbox?

For an existing mailbox, the new nameplate should not be chosen solely on the basis of the visible size. Important are the mailbox model, the existing plate type, external dimensions, insert size and fixing.

For many BML nameplates only the insert can be exchanged. The existing holder remains on the mailbox and is reused. This is often the simplest solution, for example in the case of a name change or a change of tenant.

However, if the complete holder is damaged, missing or the existing design is to be changed constructively, you need the complete nameplate that matches the mailbox.

The complete plate does not always need replacing

Nameplate insert or complete nameplate?

Which option is sensible depends primarily on the condition of the existing holder and the reason for the replacement.

Situation Suitable solution Points to note
Name or inscription has changed reuse the existing holder and replace with a matching nameplate insert determine insert size and plate type exactly
Insert damaged or illegible new insert for the existing nameplate holder check material, dimensions and compatible holder
Nameplate holder damaged replace the complete model-specific nameplate shape and fixing must match the mailbox
Plastic plate should be upgraded visually for suitable BASIC mailboxes a flush-fitting stainless steel version is available check specific product compatibility before conversion
Additional plate to be stuck on self-adhesive stainless steel nameplate check available space and suitable substrate
Model and plate system belong together

Select BML nameplates by type and mailbox model

BML uses different nameplate systems depending on the mailbox series. The type designation and model assignment are therefore often more informative than a purely visual comparison.

Version Typical assignment Key characteristics
BASIC nameplate Type 2 BASIC 385, BASIC Plus 381X–385X, GOETHE 215 and STORM 480 polycarbonate; insert changeable from the front; outer dimension 75 × 22 mm, visible area 55 × 15 mm
Stainless steel insert for Type 2 suitable for BMLZB-NS-2 60 × 15 mm; stainless steel V2A; optionally with name inscription
BASIC nameplate Type 3 BASIC 380–384 and 862–863 transparent polycarbonate; insert changeable from the front; outer dimension 75 × 22 mm
Stainless steel insert Type 3 BASIC 380–384 and 862–863 model-specific insert 55 × 13 mm
Security nameplate Type 1 BASIC panels with doorbell button and suitable PREMIUM mailbox doors flush-fitting construction protected against popping out and levering; outer dimension 70 × 20 mm
Stainless steel insert for security Type 1 suitable for BMLZB-NS-1 48 × 13 mm made of stainless steel V2A
Flush-fitting BASIC nameplate for replacing suitable plastic nameplates on BASIC mailboxes two-part, consisting of a carrier plate and a 70 × 18 mm stainless steel nameplate
DoorBird D11x nameplate DoorBird call button D11x self-adhesive; stainless steel; 42 × 15 × 1 mm
DoorBird D21x nameplate DoorBird call button D21x self-adhesive; stainless steel; 57 × 15 × 1 mm
Important: Similar outer dimensions do not automatically mean that inserts or holders are interchangeable. Always compare the complete plate type and model assignment.
Differentiate between outer dimension and insert size

How do I measure a nameplate on the mailbox correctly?

When measuring, you must distinguish whether you want to replace the complete nameplate holder or only the insert contained within it.

The outer dimension describes the complete visible holder. The visible area is smaller and shows only the readable area of the insert. The actual insert can in turn be slightly larger than the visible window because part of it disappears into the holder.

Precisely for this reason, a new nameplate should not be ordered solely on the basis of the visible text field.

Five steps to the correct identification

  1. Determine mailbox model: note the series and product designation of the existing mailbox.
  2. Check plate type: compare the shape of the existing holder with Type 1, Type 2, Type 3 or another version.
  3. Measure outer dimension: record the width and height of the complete nameplate holder.
  4. Measure insert: if only the inscription is to be changed, measure the actual insert separately.
  5. Compare product assignment: compare dimensions and model with the specifications of the intended spare part.
Practical for name and tenant changes

How is a nameplate insert changed?

For BML nameplates designed for this purpose, the insert can be changed without replacing the complete nameplate holder.

BASIC Type 2 and Type 3

In these versions the insert is changeable from the front. The existing polycarbonate holder can remain on the mailbox provided it is undamaged.

For the replacement only the insert matching the respective type is required.

Security nameplate Type 1

This version is constructed to prevent levering out and pushing through. The insert change is carried out from the front using the special tool provided for this purpose.

The holder itself is fixed from the rear and does not need to be removed for a normal name change.

Before changing: first check which insert actually belongs to the existing holder. Type 1, Type 2 and Type 3 use different inserts.
Alternative to the existing plastic plate

Can a BASIC mailbox be retrofitted with a stainless steel nameplate?

For suitable BASIC mailboxes BML offers a two-part, flush-fitting stainless steel nameplate as an alternative to the existing plastic nameplate.

The construction consists of a self-adhesive carrier plate and a separately screwed stainless steel nameplate. This means that in a later name or tenant change the visible plate can be replaced without having to replace the carrier plate again.

The visible nameplate is made of stainless steel V2A and is available in a brushed or – depending on product configuration – powder-coated finish.

Labelling on integrated door communication

Distinguish nameplates for DoorBird D11x and D21x correctly

For an integrated DoorBird door station the appropriate nameplate depends on the call button series used. D11x and D21x use different dimensions.

DoorBird D11x

The appropriate BML stainless steel nameplate measures 42 × 15 × 1 mm and is used self-adhesively on the intended D11x call button.

DoorBird D21x

For the D21x call button a larger version measuring 57 × 15 × 1 mm is used. The two sizes should therefore not be confused.

Two different applications

Replacement nameplate or custom-designed plate?

This spare parts category is primarily intended for nameplates, inserts and holders that fit an existing BML mailbox or existing door communication.

Spare part for existing mailbox

You already own a BML mailbox and want to replace an insert, nameplate holder or an associated inscription.

Then you are in the right category.

Custom-designed plate for house or entrance

If, on the other hand, you are looking for an independent name, information, house or object plate with free design, RAL colour, laser engraving or laser cut, our separate signage category is the more appropriate choice.

View custom signs →
Retrofit without an existing holder

When is a self-adhesive stainless steel nameplate sensible?

If an additional nameplate is to be attached and there is no existing holder to use, a self-adhesive stainless steel version can be sensible.

The universally usable BML stainless steel plate measures 70 × 20 mm and can optionally be inscribed. It is crucial that there is sufficient space and a suitable surface at the desired mounting location.

If, on the other hand, an existing BML nameplate holder is to be reused, the model-specific insert is usually the more precise solution.

Small spare part, big impact

Why use a model-specific BML nameplate?

A damaged or no longer current nameplate is no reason to replace a fully functional mailbox.

The advantage of a model-specific spare part is that the existing mailbox, holder and insert are considered together. Thus, for many versions only the actually required component needs to be replaced.

This is particularly sensible for apartment buildings, rental properties and mailbox systems where inscriptions may change more frequently during the period of use.

Our 10-year spare parts supply is a BML service promise for the long-term use of our products.

Briefly answered

Frequently asked questions about replacement nameplates for mailboxes

Which nameplate fits my BML mailbox?

The deciding factors are mailbox model, existing nameplate type and the dimensions of the holder or insert. At BML there are, among others, Type 1, Type 2 and Type 3 as well as other model- or system-specific versions.

Do I have to replace the complete nameplate if only the name changes?

Often not. If the existing nameplate holder is still intact and has a changeable insert, a new matching nameplate insert is sufficient.

What is the difference between nameplate Type 2 and Type 3?

Both versions have similar outer dimensions but are assigned to different BML models. Type 2 is used, among others, for BASIC 385, BASIC Plus, GOETHE 215 and STORM 480. Type 3 is intended for BASIC 380–384 and 862–863.

Can I change the insert from the front?

For BASIC Type 2 and Type 3 the insert is changeable from the front. The security nameplate Type 1 is also changed from the front, but there with the special tool provided for this purpose.

Which insert do I need for the security nameplate Type 1?

For the BML security nameplate Type 1 a stainless steel nameplate insert of 48 × 13 mm is offered.

Can a plastic nameplate be replaced with stainless steel?

For suitable BASIC mailboxes BML offers a flush-fitting two-part stainless steel nameplate that can be exchanged for the corresponding plastic nameplate.

Are the nameplates for DoorBird D11x and D21x the same size?

No. For the DoorBird D11x call button a 42 × 15 × 1 mm version is offered, whereas the D21x nameplate measures 57 × 15 × 1 mm.

Can I have a replacement nameplate inscribed?

For various BML stainless steel inserts and nameplates a name inscription can be chosen as a product option. Which inscription is available depends on the respective spare part.

Are there self-adhesive nameplates for mailboxes?

Yes. Among other things, BML offers a universally usable self-adhesive stainless steel nameplate. However, for existing model-specific nameplate holders it should first be checked whether a matching insert is the better solution.

Where can I find custom-designed name and entrance plates?

Custom-designed name, house, information and object plates do not belong to the actual spare parts area. For these, the separate BML category for custom signs and stainless steel inscriptions is available.

How long are BML nameplates available as spare parts?

Die Briefkasten Manufaktur provides a 10-year spare parts supply. Which specific insert or plate version fits an older product should be checked based on model and existing version.

What can I do if I cannot assign my nameplate?

Please send us, if possible, the model or article number of the mailbox, as well as photos of the complete nameplate and the existing insert. Measurements of the holder and insert additionally facilitate the assignment.

Plate type not clearly identified?

We will help select the appropriate replacement nameplate

Send us the designation or article number of your mailbox and photos of the existing nameplate. If possible, also provide external dimensions and insert size. This makes it possible to check whether only a new insert or a complete nameplate is required.

Request a suitable nameplate
Shop Assistant AI

You are chatting with an AI assistant. Replies may contain errors and are non-binding.

Hello, I am your shop assistant, how may I help you?