When is an impact guard for columns and posts useful?
An impact guard is particularly useful where freestanding technology or entrance elements are located close to driveways, car parks or manoeuvring areas. It creates a visible and physical separation between vehicles and the column.
The BML Impact Guard 672 is not intended as an arbitrary universal hoop. The available sizes are matched to selected mailbox columns, charging posts and other BML columns. This allows the protection area to be planned to suit the respective housing without occupying unnecessary space.
Which impact guard size fits which BML column?
For the impact guard, width is not the only consideration. It is important that the protection dimensions match the specific column or post and that doors, control sides, cable routes and maintenance access remain accessible.
| Impact guard dimensions W × H × D | Suitable for BML items | Planning note |
|---|---|---|
| 555.3 × 300 × 465.3 mm | 870, 872 | Compact protection size for the assigned column models. |
| 625.3 × 300 × 517.3 mm | 601, 601KL | Greater depth for the corresponding housing and column dimensions. |
| 735.3 × 300 × 465.3 mm | 215-STL, 599, 603, 604, 605 | Medium width for several mailbox, communication and technical posts. |
| 825.3 × 300 × 487.3 mm | 599B, 599RB, 720RB, 605B | For wider or deeper column variants. |
| 971.3 × 300 × 587.3 mm | 602, 608 | Generous protection area for the assigned larger posts. |
| 975.3 × 300 × 687.3 mm | 599BPK | Largest standard version with additional depth. |
Solid stainless steel, clean lines and a tailored protection zone
The impact guard is manufactured from stainless steel V2A 1.4301. The round tube construction visually takes up less mass than a closed protective body and keeps the column, control side and surroundings clearly visible.
Bolted down or concreted in?
Depending on the version, the impact guard can be bolted down with base plates or concreted in with extended support posts. Which fixing is appropriate depends on the subsoil, the planned load, existing foundations and the local conditions.
For charging and power columns, cable routes and supply lines should be considered in the foundation planning. For mailbox or communication posts, access doors, bell areas and maintenance openings must remain freely operable.
The impact guard serves as a constructive separation against accidental driving and manoeuvring contacts. A defined impact or crash class is not specified in the product data; it should therefore not be equated with a tested vehicle restraint system.
Quick checks before ordering
- What is the article number of the column or post to be protected?
- How do the driveway, parking space and manoeuvring area run?
- Do doors, flaps and control elements remain freely accessible?
- Are there cables, conduits or foundations in the fastening area?
- Is bolting down or concreting in more suitable for the subsoil?
- Should the surface be brushed stainless steel or finished in RAL/DB colours?
- Is a special size or a deviating protection geometry required?
Suitable application areas in the BML range
The 672 ST-R combines protective function with a design that matches the freestanding metal products of the Briefkasten Manufaktur. This allows it to be integrated into various entrance, energy and charging projects.
Mailbox columns & posts
An impact guard can be useful for mailbox, parcel or communication posts if the installation is close to an access road, parking space or manoeuvring area.
View mailbox columns & posts →EV charging stations
At charging points in parking areas, the impact guard helps to create a clear distance between vehicle movement and charging equipment. Foundations and cable routes should be planned together.
View charging stations →Power & socket columns
Freestanding power and socket columns may also require additional mechanical clearance in trafficked outdoor areas. The specific geometry of the project is decisive.
View power & socket columns →Frequently asked questions about the impact guard in stainless steel
What is an impact guard on a column used for?
An impact guard creates a physical distance between vehicle movement and a freestanding column or post. This is particularly useful at parking spaces, driveways and manoeuvring areas where mailbox, charging or power technology is located close to the traffic route.
How do I find the right size for my impact guard?
The most reliable method is to use the article number of the existing or planned BML column. The Impact Guard 672 is available in six standard sizes that are assigned to specific column and post items. For special configurations, the combination should be checked in advance.
What material is the BML impact guard made of?
The Impact Guard 672 is manufactured from stainless steel V2A 1.4301. The support posts and crossbars are made from 60.3 mm stainless steel tube. The surface is available either brushed or powder-coated, depending on the variant.
Is the impact guard available in RAL colours?
Yes. In addition to brushed stainless steel, a powder-coated version in RAL or DB colours is available. This allows the impact guard to be colour-matched to a charging station, mailbox post, façade or other metal components.
Can the impact guard be bolted down or concreted in?
Depending on the version, bolted installation or concreting in is provided. The decision should be made based on the subsoil, foundation, cable routing and intended use. For charging and power columns, electrical supply lines must already be considered in the foundation planning.
Is the impact guard a tested vehicle restraint system?
No defined impact or crash class is stated in the product data for the Impact Guard 672. It is intended as a constructive protection for columns and posts and should not be equated with a correspondingly tested vehicle restraint system.
Column, size or fixing type still undecided?
Please provide us with the article number of the column, the installation location, the desired finish and the structural situation. We will assist in selecting the appropriate impact guard and will check project-specific special requirements.
