Which indoor station suits my door-entry system?
An indoor station should always be chosen to match the existing or planned door-entry system. Devices from different manufacturers and system platforms cannot be combined arbitrarily.
Therefore first check which door station is installed outside and which technology the system uses to communicate. You can then decide whether a pure audio indoor station, a video indoor station with display or a networked solution with additional app functions is appropriate.
For an existing installation, manufacturer, system designation and existing cabling are particularly important. For a new build, however, the indoor station, door station, network, power supply and door opener can be planned together from the outset.
Audio indoor station or video indoor station?
Both variants serve to communicate with the entrance. The decisive difference is the camera image.
| Type | Typical function | Particularly suitable for |
|---|---|---|
| Audio indoor station | Answer door calls, speak, listen and, depending on the system, operate the door opener | Installations where a reliable voice connection without a camera image is sufficient |
| Video indoor station | Speak and additionally display the image from a compatible external camera | Entrances where visitors should be visually identified before opening |
| Networked indoor station | Depending on the system: video, audio, door opening, network and other building functions | IP-based or otherwise networked door communication systems |
| Smartphone app | Use door calls and other functions on the move, provided the system supports this | Complement to a fixed indoor station or mobile call acceptance – system-dependent |
DoorBird, COMELIT, Gira or Busch-Jaeger?
BML supplies indoor stations for several established door-entry systems. Within each system platform different audio, video and network functions are available.
| System platform | Examples in this category | Technical classification |
|---|---|---|
| DoorBird | IP video indoor stations such as A1101 and A1103 | Network-based door communication; depending on the model Ethernet, Wi‑Fi and PoE |
| COMELIT | LOGOS indoor stations as well as IP indoor stations | Including 2‑wire/Simplebus2 and IP-based systems; mobile functions vary by version |
| Gira | Audio and video indoor stations | Including classic 2‑wire bus components as well as separate IP video variants |
| Busch-Jaeger | Busch‑Welcome audio and video indoor stations | Selection suitable for the Busch‑Welcome door communication system |
When is a permanently installed indoor station appropriate?
A fixed indoor station provides a clearly defined control point for door-entry communication.
This is particularly practical when several people use the system, not every resident should use their own smartphone or the door opener should be quickly accessible via a permanently mounted control point.
Video indoor stations can additionally display the camera image. Depending on the device, further functions such as inter-floor call, internal communication, switching functions or network functions are available.
IP indoor station or 2‑wire indoor station?
Neither technology is inherently better. What matters is which system is present or planned in the building.
2‑wire / BUS
Manufacturer-specific 2‑wire systems transmit communication and, depending on the system, also power over a corresponding bus cable.
In existing installations this can be interesting if existing cables, after inspection, can be reused for the chosen system.
IP / network
IP indoor stations are integrated into the network structure. Depending on the product, the connection is via Ethernet, Wi‑Fi or both.
For compatible devices, PoE can additionally provide power over the network cable.
Indoor station or smartphone app – do I need both?
That depends on the chosen door-entry system. An app can complement a fixed indoor station and bring door calls to mobile devices.
Whether an app works without an additional indoor station or requires a compatible indoor station or a gateway depends on the manufacturer and system.
Therefore check not only whether an app is offered, but also which hardware, network connection, user accounts and other system components are required for it.
Indoor station for a detached house, block of flats or commercial property
In a detached house a single central indoor station in an easily accessible place is often sufficient. Depending on the layout, an additional station or a mobile supplement may be useful.
In a block of flats each dwelling must be clearly assigned to its call destination. The number of participants and system limits should therefore be taken into account during planning.
In office and commercial properties, indoor stations can be used, for example, at reception, at a concierge desk or at other defined locations. Here internal communication and multiple entrances also play a role – provided the respective system supports these functions.
Indoor station, complete set or accessories?
The range includes not only individual indoor stations but also complete sets and accessories. Therefore always check the product name and the actual scope of delivery.
| Product type | What you receive | What to pay attention to |
|---|---|---|
| Indoor station | Single audio or video indoor station | Compatible door station and system technology required |
| Complete set | Several components of a door communication system listed in the respective article | Check the scope of delivery carefully |
| Table stand | Accessory for placing a suitable indoor station | Use only with the explicitly intended devices |
| Door chime | Acoustic call signalling | Does not automatically replace an audio or video indoor station |
| System devices | Power supplies, control units, gateways or other system-specific components | Sizing and compatibility with the overall system |
Can an old indoor station be easily replaced?
Not every new indoor station is a direct replacement for an older device.
When replacing, manufacturer, system family and existing connection type should first be determined. Only then can it be checked which current indoor station is compatible within that system.
If you also want to switch from audio to video, from an older bus system to IP or to additional app functions, a more extensive system modification may be required.
Check an existing installation in five steps
- Determine the manufacturer: Note the name and type designation of the existing indoor and outdoor station.
- Identify the system: Determine whether it is 2‑wire, bus, IP or another manufacturer-specific technology.
- Check the cabling: Document existing cable routes and connections.
- Define desired functions: Define audio, video, app, door opening and other requirements.
- Select a compatible device: Only then order the appropriate new indoor station or system extension.
Why plan the indoor station and entrance area together?
BML's advantage lies in combining individually designed entrance solutions with the system technology of established manufacturers.
This means not only the indoor station can be considered. The door station, mailbox system, camera, doorbell button, power supply, door opener and other components can also be planned to match the chosen system platform.
This creates a clear technical relationship: the BML entrance solution outside and the associated door communication inside are not seen as independent individual products.
Frequently asked questions about indoor stations
What is an indoor station?
An indoor station is the indoor unit of a door-entry system. It receives the call from the door station and, depending on the model, enables speaking, camera image, door opening and other system functions.
What is the difference between a door station and an indoor station?
The door station is located at the entrance and is operated by the visitor. The indoor station is located inside the building and is used to receive calls and communicate with the entrance.
Can every indoor station be combined with every door station?
No. Indoor and outdoor stations must belong to the same or explicitly compatible door-entry system.
What is the difference between an audio and a video indoor station?
An audio indoor station enables voice connection. A video indoor station supplements this function with a display for the camera image of a compatible door station.
Is an IP indoor station better than a 2‑wire indoor station?
Not fundamentally. The appropriate technology depends on the existing or planned infrastructure. A compatible 2‑wire system can be interesting for existing cabling, while IP solutions are integrated into suitably planned network structures.
Do I still need an indoor station if there is an app?
That depends on the system. In some installations the app can complement a fixed indoor station or provide certain functions on mobile devices. Other systems require a compatible indoor station, a gateway or further components for mobile use.
Can I use multiple indoor stations?
Many door-entry systems support multiple indoor stations or participants. How many devices are possible and how they are connected, however, depends on the specific system.
Can I simply replace my old indoor station with a new one?
Only if the new station is explicitly compatible with the existing system. Manufacturer, system family, cabling and existing system devices should be checked before replacement.
Who should connect an indoor station?
Connection and commissioning of a door-entry system should be carried out by qualified professionals in accordance with the manufacturer's instructions.
We help you choose the right indoor station
Tell us the manufacturer and type of your existing door station or door-entry system. For existing installations, photos of the previous indoor station and information about the existing cabling also help. This allows a targeted check to determine which indoor station or system extension is suitable.
