Rain canopy and side panels
The rain canopy and side panels combine the individual mailboxes into a single closed surface-mounted system. The coordinated cladding provides a calm front and a neat finish against the façade.
From €2,369.00
Delivery time approx. 4 weeks
Have you not found anything suitable? Configure your letterbox to meet your individual requirements!
The BASIC Plus 385XA surface-mounted mailbox system for 10 households is a robust wall solution for apartment buildings, residential complexes and commercial properties. The wider W-configuration distributes the mailboxes across a multi-column front and keeps the overall system relatively low and tidy in appearance.
The BASIC Plus mailbox system is consistently made from stainless steel V2A and is powder-coated in the chosen RAL colour. The modular construction is designed for durability, easy installation and good spare parts availability.
Each mailbox measures 300 × 110 × 385 mm (W × H × D) and offers approx. 12 litres of capacity. The 35 × 265 mm insertion opening is designed for DIN C4 items in portrait orientation. The doors open from left to right; each mailbox is supplied with two keys bearing a key number and a replaceable nameplate located beneath the mail flap.
The rain canopy and side panels combine the individual mailboxes into a single closed surface-mounted system. The coordinated cladding provides a calm front and a neat finish against the façade.
The 300 × 110 × 385 mm (W × H × D) mailboxes each offer approx. 12 litres of capacity. The 35 × 265 mm insertion opening also accepts larger DIN C4 items in portrait orientation.
The rubber lip damps the mail flap. Robust locks, two keys with key number and protected replaceable nameplates ensure clear assignment of the individual mailboxes.
The surface-mounted system is designed for direct façade installation. A mounting rail makes installation easier; fixings including screws and wall plugs are part of the described configuration.
V2A stainless steel forms the robust basis; the powder coating can be applied in the desired RAL colour to match the façade, front door and window frames. BASIC Plus also stands for consistent V2A use, modular construction and directly available spare parts.
The wall must be even and sufficiently load-bearing. The supplied screws and wall plugs should only be used if they are suitable for the existing wall construction; for other substrates or external thermal insulation systems, suitable fixing solutions must be determined on site.
Mail is best protected from moisture and dirt only when items are fully inserted and the mail flap is closed. Protruding letters or magazines can prevent the flap from closing completely.
The BASIC Plus series consistently uses stainless steel V2A and a modular, installation-friendly construction. Spare parts are directly available for BASIC Plus systems.
| Material: | Stainless steel V2A 1.4301 |
|---|---|
| Number of boxes: | with 10 letterboxes |
| Removal of mail: | On the front |
Briefkasten Manufaktur Lippe GmbH
Werler Str. 60
32105 Bad Salzuflen
Deutschland
info@briefkasten-manufaktur.de
WEEE-Reg.-Nr. DE 24652177
| Height of single box in mm: | 110.0 |
|---|---|
| Width of single box in mm: | 300.0 |
| Capacity in litres: | 12 |
| Height of letterbox slot in mm: | 35.0 |
| Width of letter slot in mm: | 265.0 |
| Height of letterbox in mm: | 550.0 |
| Width of letterbox system in mm: | 600.0 |
| Total width in mm: | 608.0 |
| Depth in mm: | 435.0 |
| Weight in kg: | 55 |
| Delivery condition: | Delivered partially assembled. |
| Shipping information: | Depending on the order volume, delivery will be made by parcel or bulky‑goods delivery. Partial deliveries are possible for products that can be disassembled (e.g. for freestanding letterboxes the stand and the box may be dispatched separately). |
Downloads
A mailbox or mailbox system should not only fit on the day it is installed. That is why we combine product development, metalworking, installation and service with manufacturing that allows many individual adaptations.
The Briefkasten Manufaktur has been family-run since 2003. A large proportion of our products is produced by hand in Bad Salzuflen, supported by modern manufacturing technology. This keeps planning, production and points of contact close together – from the first product comparison to spare parts or a later extension.
Manufacturing includes, among other processes, laser cutting, press braking, welding, laser marking, powder coating and assembly of modules. The short distance is particularly important to you: questions about dimensions, construction, labelling or technical integration can be addressed directly with the product knowledge from development and production.
Especially with mailbox systems, bespoke sizes and entrance systems, careful planning helps to avoid later compromises in installation, appearance and operation.
Many of our mailboxes and mailbox systems can be configured in numerous RAL colours. Depending on the series, different dimensions, numbers of boxes, labellings, house numbers, newspaper compartments as well as doorbell and door communication modules are also possible.
Which options are available depends on the specific product. For requirements outside the offered configuration, we review bespoke requests on a project basis.
A good entrance solution does not end with the order. Clear planning, reachable contacts and available spare parts help to make sensible long-term use of the system.
For project-specific systems, drawings and coordination can help to define dimensions, arrangement and special requests clearly before production begins.
For questions about variants, installation or later changes, our team in Bad Salzuflen is available as a direct point of contact.
Locks, nameplates and other components should not automatically make replacement of the entire system necessary.
If a standard version does not suit the building, we examine on a project basis which adjustments are technically and aesthetically feasible.
BASIC is designed for a wide selection of designs, sizes and fittings. Which combination is available always depends on the specific product.
BASIC combines a solid, everyday-suitable construction with a wide range of variants. The series is particularly suitable when the number of households, mounting type, colour and fittings are to be chosen to match the building without unnecessary planning complexity.
Yes. Depending on the model, BASIC offers systems for a small or large number of households and is therefore particularly interesting for apartment blocks, rental properties and multi-unit buildings. Decisive factors are the required number of boxes, the expected post volume and the available installation space.
The BASIC product family includes, depending on the model, surface-mounted, flush-mounted, free-standing, through-wall and fence solutions. This allows the mailbox system to be planned for wall, property boundary or building envelope to suit the installation situation.
Depending on the BASIC model, powder-coated galvanised steel, stainless steel and various RAL colours are available. Box dimensions and volumes also differ. Therefore, when choosing, always check the specific compartment size and the expected post volume in addition to the appearance.
Selected BASIC versions can include doorbell and light buttons, intercom stations, camera preparations, parcel compartments, newspaper shelves or other functional modules. Which technology can be integrated or prepared depends on the respective model.
Conformity to the standard is product-specific. Many BASIC mailboxes are declared accordingly; the decisive information is on the respective product page. There you will also find insertion size, compartment dimensions and further technical data for the specific version.
Depending on the product, classic mailbox locks and selected digital solutions are available. For many typical wear and replaceable parts such as locks or nameplates there are matching spare parts; Briefkasten Manufaktur specifies a ten-year spare parts availability for its products.
Please describe the building, desired construction type, number of users and special functions. We will check which mailbox or entrance solution can be implemented sensibly from a technical perspective.