Skip to main content Skip to search Skip to main navigation
Menu

2-unit 1x2 flush-mounted letterbox system BASIC 382U UP - RAL 7016 anthracite grey

2-unit 1x2 flush-mounted letterbox system BASIC 382U UP - RAL 7016 anthracite grey

Article number: 382U-7016-2S-100
Series: BASIC

Have you not found anything suitable? Configure your letterbox to meet your individual requirements!

Open the 3D configurator

Outstanding quality with a 5-year guarantee
10 years spare parts supply
100% UV and weather-resistant material
Particularly stable & durable for mail that is always dry
Description

2-unit 1x2 recessed letterbox system BASIC 382U UP - RAL 7016 anthracite grey

Modern recessed letterbox - made in Germany by Briefkasten Manufaktur.

The 2-unit letterbox is made from galvanised steel, powder-coated in Anthracite Grey RAL 7016. The very high-quality workmanship and the well thought-out design make this recessed letterbox one of our top sellers. A rain runoff edge for optimal water protection, a continuous rubber lip for quiet posting, the sturdy interchangeable nameplate, a practical mail-retention bar and the very robust lock characterise this recessed letterbox. The recessed frame made of stainless steel V2A is equipped with a foam rubber seal and guarantees very high durability.

Thanks to its design, self-installation is straightforward.

  • 2-unit recessed letterbox made from galvanised steel, powder-coated in Anthracite Grey RAL 7016.
  • The system is produced by Briefkasten Manufaktur. German quality manufacturing "Made in Germany".
  • The letterbox complies with DIN/EN 13724. Insertion size (3.5 cm x 32.5 cm) for C4 landscape — large envelopes fit in here without bending.
  • Insertion flap with noise-dampening rubber seal for very quiet mail insertion.
  • The door opens from left to right.
  • Includes 2 keys with key number, interchangeable nameplate (Type 2) under the insertion flap and mail-retention bar.
  • Large capacity via optional mailbox depth +50 mm = approx. 17 l. Suitable for businesses and households with very high mail volumes.
  • Plaster cover frame made from stainless steel angle profile 25 x 58 mm, powder-coated in RAL colour.

Important information:

Mail is only protected from moisture and dirt when it has been fully inserted and the flap is closed. Under certain extreme weather conditions, water may still enter (according to DIN EN 13724 up to 1 ccm). This is not grounds for complaint.

Properties
Material: Steel, galvanised
Number of boxes: with 2 letterboxes
Removal of mail: On the front
Manufacturer

Briefkasten Manufaktur

Briefkasten Manufaktur Lippe GmbH
Werler Str. 60
32105 Bad Salzuflen
Deutschland
info@briefkasten-manufaktur.de
WEEE-Reg.-Nr. DE 24652177

Height of single box in mm: 330.0
Width of single box in mm: 355.0
Capacity in litres: 12.0 | 17.0
Height of letterbox slot in mm: 35.0
Width of letter slot in mm: 325.0
Height of letterbox in mm: 710.0
Width of letterbox system in mm: 405.0
Total width in mm: 405.0
Depth in mm: 100.0 | 150.0
Weight in kg: 16
Delivery condition: Delivered fully assembled.
Shipping information: Depending on the order volume, delivery will be by parcel delivery or bulky-goods delivery. Partial deliveries are possible for items that can be dismantled (e.g. for freestanding letterboxes, the stand and the box may be sent separately).
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

Please enter at least 5 characters.
Please enter at least 40 characters.
(Maximum number of files:3, Maximum file size (in MB):16, Allowed file extensions:jpeg;jpg;png;webp)
No files selected

Accessories

Configurator
Unbeschriftete, rechteckige Namensschildeinlage aus geschliffenem Edelstahl in Schrägansicht, 55 × 13 mm, 1 mm stark, für BASIC 380–384 und 862–863 von Briefkasten Manufaktur.

Average rating of 5 out of 5 stars

Selbstklebendes Namensschild aus geschliffenem Edelstahl mit grauer Aufschrift „Bitte keine Werbung“ in Arial, in Schrägansicht auf weißem Hintergrund.

Average rating of 5 out of 5 stars

Configurator
Rückseite des selbstklebenden Trägerblechs für das flächenbündige Namensschild am BASIC Briefkasten, mit dunkelgrauer Mittelfläche und umlaufenden roten 3M-Klebestreifen.

Average rating of 4 out of 5 stars

Weiße Briefeinwurfklappensperre Stopy aus Kunststoff mit STOP-Schriftzug, roter Stopp-Hand und Comicfigur. Zur Montage über die Namensschildöffnung als Schutz vor ungewollter Postzustellung.
Stopy letter flap lock

Regular price: €16.90

Spare parts

Similar products

🎨 COLOUR CHOICE
Configurator
Grauer Design-Unterputzbriefkasten GOETHE UP von Briefkasten Manufaktur in Frontansicht mit breiter Einwurfklappe, Beschriftung „Familie Beckemeyer“ und Hausnummer 23. Geradlinige Front ohne sichtbares Schloss.
Designer flush-mounted mailbox GOETHE UP - RAL colour of your choice
Depth: 100mm depth Finish: with 1 mailbox

From €489.00
🎨 COLOUR CHOICE
Configurator
Frontansicht des anthrazitfarbenen Unterputz-Briefkastens GOETHE UP mit oberer Einwurfklappe und Edelstahlapplikation, beschriftet mit „Familie Hilkens“ und der Hausnummer 25a.

Average rating of 5 out of 5 stars

🎨 COLOUR CHOICE
Configurator
Anthrazitfarbener Design-Unterputz-Briefkasten GOETHE UP in Frontansicht mit oberer Einwurfklappe, glatter Front ohne sichtbares Schloss und unterem Zeitungsfach mit der Aufschrift „ZEITUNG“.

Average rating of 5 out of 5 stars

Made in Germany since 2003

Briefkasten Manufaktur: designed, manufactured and supported in Bad Salzuflen

A mailbox or mailbox system should not only fit on the day it is installed. That is why we combine product development, metalworking, installation and service with manufacturing that allows many individual adaptations.

The Briefkasten Manufaktur has been family-run since 2003. A large proportion of our products is produced by hand in Bad Salzuflen, supported by modern manufacturing technology. This keeps planning, production and points of contact close together – from the first product comparison to spare parts or a later extension.

Manufacture of a mailbox system at the Briefkasten Manufaktur in Bad Salzuflen
Manufacturing in Bad Salzuflen Product expertise, metalworking and installation remain closely linked.
Not just selling, but developing in-house

Product development and manufacturing are closely linked

Manufacturing includes, among other processes, laser cutting, press braking, welding, laser marking, powder coating and assembly of modules. The short distance is particularly important to you: questions about dimensions, construction, labelling or technical integration can be addressed directly with the product knowledge from development and production.

Especially with mailbox systems, bespoke sizes and entrance systems, careful planning helps to avoid later compromises in installation, appearance and operation.

Matched to the building rather than off-the-shelf standard

Colours, labelling and fittings tailored to the project

Many of our mailboxes and mailbox systems can be configured in numerous RAL colours. Depending on the series, different dimensions, numbers of boxes, labellings, house numbers, newspaper compartments as well as doorbell and door communication modules are also possible.

Which options are available depends on the specific product. For requirements outside the offered configuration, we review bespoke requests on a project basis.

Selection of different RAL colours for mailboxes and mailbox systems
Colour as part of the architecture Mailbox, front door, façade and entrance technology can be coordinated with each other depending on the model.
What matters after purchase

Planning, service and preservation of value go hand in hand for us

A good entrance solution does not end with the order. Clear planning, reachable contacts and available spare parts help to make sensible long-term use of the system.

Planning before production

For project-specific systems, drawings and coordination can help to define dimensions, arrangement and special requests clearly before production begins.

Service even after purchase

For questions about variants, installation or later changes, our team in Bad Salzuflen is available as a direct point of contact.

Spare parts instead of complete replacement

Locks, nameplates and other components should not automatically make replacement of the entire system necessary.

Assess bespoke solutions

If a standard version does not suit the building, we examine on a project basis which adjustments are technically and aesthetically feasible.

BASIC briefly explained

Frequently asked questions about the BASIC mailbox series

BASIC is designed for a wide selection of designs, sizes and fittings. Which combination is available always depends on the specific product.

What characterises the BASIC mailbox series?

BASIC combines a solid, everyday-suitable construction with a wide range of variants. The series is particularly suitable when the number of households, mounting type, colour and fittings are to be chosen to match the building without unnecessary planning complexity.

Is BASIC suitable as a mailbox system for an apartment building?

Yes. Depending on the model, BASIC offers systems for a small or large number of households and is therefore particularly interesting for apartment blocks, rental properties and multi-unit buildings. Decisive factors are the required number of boxes, the expected post volume and the available installation space.

What mounting types are available with BASIC?

The BASIC product family includes, depending on the model, surface-mounted, flush-mounted, free-standing, through-wall and fence solutions. This allows the mailbox system to be planned for wall, property boundary or building envelope to suit the installation situation.

Which colours, materials and mailbox sizes are available?

Depending on the BASIC model, powder-coated galvanised steel, stainless steel and various RAL colours are available. Box dimensions and volumes also differ. Therefore, when choosing, always check the specific compartment size and the expected post volume in addition to the appearance.

Can BASIC be combined with doorbell, intercom, camera or parcel compartment?

Selected BASIC versions can include doorbell and light buttons, intercom stations, camera preparations, parcel compartments, newspaper shelves or other functional modules. Which technology can be integrated or prepared depends on the respective model.

Do BASIC mailboxes comply with DIN EN 13724?

Conformity to the standard is product-specific. Many BASIC mailboxes are declared accordingly; the decisive information is on the respective product page. There you will also find insertion size, compartment dimensions and further technical data for the specific version.

Which locking systems and spare parts are available for BASIC?

Depending on the product, classic mailbox locks and selected digital solutions are available. For many typical wear and replaceable parts such as locks or nameplates there are matching spare parts; Briefkasten Manufaktur specifies a ten-year spare parts availability for its products.

Personal planning available

Does your requirement not fit the standard range?

Please describe the building, desired construction type, number of users and special functions. We will check which mailbox or entrance solution can be implemented sensibly from a technical perspective.

Submit an individual enquiry
Shop Assistant AI

You are chatting with an AI assistant. Replies may contain errors and are non-binding.

Hello, I am your shop assistant, how may I help you?