From €4,559.00
Production and delivery approx. 8 - 9 weeks
Haven't found anything suitable? Configure your mailbox entirely to your own specifications!
Design through-wall letterbox GOETHE MDW - RAL of your choice - GIRA System 106 - VIDEO complete set
The modern GOETHE through-wall letterbox with seamlessly integrated Gira System 106 in a flush-mounted design is ideal for a high-quality entrance area. The linear design gives this letterbox an especially elegant appearance. Thanks to the variable chute length between 300 mm to 390 mm or 390 mm to 560 mm, this letterbox can be used in almost all types of masonry. 3 GIRA system modules are included, so the letterbox can be used immediately. The matching GIRA apartment station and the control unit to complete this letterbox are included. The modules can be exchanged later at any time using the simple retention system.
The dimensions of the individual compartments provide a capacity of approx. 24–44 litres; the large insertion aperture guarantees that DIN C4 envelopes and magazines, or post after several days' absence, will not be creased. Thanks to the drip edge, the mail inside is optimally protected from the weather. The insertion flap is equipped with high-quality hinge dampers, ensuring quiet closing and preventing disturbing rattling caused by weather conditions.
The letterbox systems of the GOETHE collection are characterised by the consistent use of stainless steel. The result is very high durability and sustainability. The construction has been developed by our own engineers with a view to high flexibility and modularity, easy spare part assembly and uncomplicated self-installation. Spare parts for all GOETHE systems are available directly in our shop.
Thanks to the design, self-installation is straightforward.
Protected utility model according to DPMA file number DE: 20 2021 101 679.5
- High-quality through-wall letterbox entirely made from stainless steel.
- Chute made from stainless steel 1.4016 (non-rusting magnetic stainless steel), bare finish.
- Body made from stainless steel 1.4016 (non-rusting magnetic stainless steel), powder-coated in a RAL colour of your choice.
- Quality manufacture - Made in Germany by Briefkasten Manufaktur Lippe.
- The letterbox complies with DIN/EN 13724. Insertion size (3.5 cm x 36.0 cm) for C4 landscape, allowing large letters to be inserted without folding.
- Letter slot & retrieval door made from stainless steel V2A 1.4301, powder-coated in a RAL colour of your choice.
- Letters are inserted and retrieved from the front. Insertion flap with high-quality hinge dampers for very quiet insertion of post.
- Retrieval door opens from top to bottom. This prevents your post from falling out towards you.
- Function box (W x H 400 x 200 mm) made from stainless steel 1.4016 (non-rusting magnetic stainless steel), powder-coated in a RAL colour of your choice.
- Nameplate made from stainless steel, powder-coated in RAL colour. Your name and/or a bell will optionally be laser-engraved onto the nameplate.
- Optionally with house number, laser-engraved (a name inscription can also be applied here).
- Incl. GIRA apartment station & control unit supplied, System 106 door station module, info module & camera module installed.
- Plaster cover frame made from stainless steel angle profile 25 x 58 mm, powder-coated in RAL colour.
- Variable chute length 300–390 mm or 390–560 mm. External dimensions of letter chute W 380 mm x H 180 mm.
- External dimensions front W 450 mm x H 450 mm; rear W 450 mm x H 250 mm.
Camera module Gira System 106 - 5561 000, installed without cabling
- Behind the interchangeable black glass pane is a high-quality camera with high light sensitivity. With a detection angle of 100° the user always has a good view of what is happening at their front door.
Info module Gira System 106 - 5560 920, installed
- For house numbers that should be prominently displayed.
Door station module Gira System 106 - 5565 920, installed without cabling
- Compact voice module with integrated call button for communication between inside and outside.
- A high-quality microphone and a weatherproof speaker ensure clear communication.
- Power supply via 2-wire bus. Additional connection for ZV (e.g. necessary from the 3rd camera module).
- All other System 106 modules (except the voice module) are powered via the door station module.
Apartment station Gira Video AP 7 1209xx, supplied
- Video apartment station with a 17.78 cm (7") TFT colour display and comfortable hands-free function for surface-mounted installation or wall mounting with flush-mounted device box or cavity wall box. With the optional stand (see Accessories) also suitable for placement on furniture. A 32 GB SD memory card is included for internal image storage. Full-surface glass front with touch functionality and tactile feedback.
Video control unit REG Gira 128800, supplied
- Control unit for powering the audio and video components of the Gira door communication bus.
- Supplies the polarity-protected and short-circuit-proof 2-wire bus when video components such as colour camera and TFT colour display are used.
- Up to 2 door stations with colour camera and 28 apartment stations with TFT colour display can be supplied via the video control unit.
- In total, up to 15 colour cameras can be controlled by the video control unit (5 video door stations and 10 TKS camera gateways), of which two door stations with colour camera can be powered by the video control unit. The remaining colour cameras must each be operated with their own power supply for door communication.
- Self-resetting electronic short-circuit and overload detection for the operating voltages and the bus connection.
- Buttons for system and door opener programming.
- LED status indicators for operation, overload, system programming and door opener programming.
- AC 12 V output for powering a commercially available door opener.
- Relay output to switch a door opener with its own power supply.
- Door opener switching time continuously adjustable from 1 to 10 s.
Important information
Camera or intercom provision
The intercom systems must be connected by an electrician. Please contact the electrician of your choice for planning, installation and commissioning.
Water protection
To achieve optimal protection of your mail from water, the letterbox or letterbox system should, if possible, be located under a canopy.
Mail is only protected from water if it is fully placed inside the box and the insertion flap is closed. Partially inserted mail allows moisture and dirt to enter the letterbox. This system is protected against water ingress in accordance with DIN EN 13724. Water ingress is not a reason for complaint.
| Connection technology: | 2-wire |
|---|---|
| Material: | Stainless steel 1.4016 (non-rusting magnetic stainless steel), Stainless steel V2A 1.4301 |
| Number of bell push buttons: | 1 button |
| Number of boxes: | with 1 letterbox |
| Removal of mail: | On the back |
Briefkasten Manufaktur
Briefkasten Manufaktur Lippe GmbH
Werler Str. 60
32105 Bad Salzuflen
Deutschland
info@briefkasten-manufaktur.de
WEEE-Reg.-Nr. DE 24652177
| Height of single box in mm: | 200,0 |
|---|---|
| Width of single box in mm: | 400,0 |
| Capacity in litres: | 24,0 - 32,0 | 32,0 - 44,0 |
| Height of letterbox slot in mm: | 35,0 |
| Width of letter slot in mm: | 360,0 |
| Total width in mm: | 450,0 |
| Depth in mm: | BK 300.0 - 390.0 | BK 390.0 - 560.0 | FK 100.0 |
| Weight in kg: | 21 |
| Delivery condition: | Supplied partially disassembled |
| Shipping information: | Depending on the order volume, delivery will be by parcel post or bulky goods. Partial deliveries are possible for dismountable products (e.g. stand mailboxes can be shipped separately). |
Is the GOETHE mailbox sustainable?
The innovative GOETHE system from Briefkasten Manufaktur redefines sustainability in product design. Every component of this system is interchangeable, creating a durable solution that lasts a lifetime. This approach opens up unique possibilities and positions the product well beyond the industry standard.
With the GOETHE system, we are setting a milestone in sustainable product development. Our commitment to environmental protection and durability is reflected in this concept. By minimising the need to discard components, we reduce resource waste and contribute to a sustainable future.
Is the GOETHE® collection available in the configurator?
The GOETHE® mailbox is available in all installation options offered by Briefkasten Manufaktur. The GOETHE® mailbox can be configured as a wall-mounted or as a freestanding mailbox. In the wall-mounted version, the mounting options through-wall, recessed (flush-mounted) and surface-mounted are available. In the freestanding version, the mounting options pedestal or freestanding elements are available. All variants can be created in the Mailbox Configurator.
Downloads
The Mailbox Manufacturer - Tradition since 2003
At Briefkasten Manufaktur you can order your mailbox, freestanding mailbox or mailbox system directly in the shop with countless customisations! Briefkasten Manufaktur uses only systems, components & individual parts from renowned German manufacturers. However, our customer service does not end with your order: after placing your order you will, where applicable, receive a technical drawing by e-mail as a PDF to ensure your requirements are realised down to the smallest detail. We address your requirements in detail; as a rule, even special requests that go beyond our configuration options can be implemented. After you approve production, your mailbox will be manufactured individually and conveniently delivered by parcel courier. Even here our customer service does not end — we ensure, with carefully coordinated packaging, that the stainless-steel mailboxes, mailbox systems, doorbells and lights are delivered to you in perfect condition.
If a purchased product does not meet your expectations or is not to your satisfaction, you face no risk as a consumer. You may return our products within two weeks.
Mailboxes in over 80 colours
At Briefkasten Manufaktur, you can choose from more than 80 colours or specify your preferred shade using a RAL colour code. In addition to the extensive colour range, we also offer premium finishes for an even more attractive appearance.
Designer letterboxes. Versatility through bespoke manufacture.
Every product at Briefkasten Manufaktur is a bespoke item and is handcrafted for you only after you place your order. Many of our products can therefore already be ordered directly in the shop with countless customisations. This is made possible by the modular design, flexible prefabrication, warehousing and logistics. Individual components are already prefabricated, meaning very short delivery times can sometimes be achieved.
Easy installation thanks to well-thought-out designs
Our mailbox systems are supplied with comprehensive, easy-to-understand documentation and installation aids, and are typically fully assembled within a very short time.

