1-unit flush-mounted mailbox system BASIC – Edition NELLY – BI-colour stainless steel / RAL 7016 anthracite grey
"Everything begins with longing." – Nelly Sachs
The NELLY edition combines the proven BASIC mailbox technology with a noticeably more individual appearance. The mailbox housing is made from galvanised steel and is powder-coated in RAL 7016 anthracite grey fine-structure matt, while the inlet flaps are manufactured from stainless steel V2A 1.4301 and finished with 240-grit abrasion. This deliberate bi-colour contrast looks modern and high-quality and can be combined with many front doors, windows and façades. As a flush-mounted version with 1 mailbox, NELLY is not only intended for mail reception but serves as a neatly designed element of the entrance. The powder-coated plaster cover frame provides a clear finish to the façade; its upper area becomes the characteristic NELLY labelling surface.
The special advantages of the NELLY edition
✦
Labelling frame integrated into the façade
With the flush-mounted version, customisation is integrated directly into the architecture: the upper area of the plaster cover frame serves as a labelling surface for the house number and/or street name. This creates no additional sign solution, but a calm, integrated NELLY look.
Integrated into the plaster cover frame
Individual laser engraving
House number & street name
BML Lasercut
◆
Bi-colour: RAL 7016 meets brushed stainless steel
The mailbox housing made from galvanised steel is powder-coated in RAL 7016 anthracite grey fine-structure matt. The inlet flaps, by contrast, are made from stainless steel V2A 1.4301 and finished with 240-grit abrasion. The stainless-steel plaster cover frame is powder-coated and sets the anthracite housing cleanly off from the façade.
RAL 7016 fine-structure matt
Galvanised steel
V2A 1.4301
240-grit finish
✉
Large slot for DIN C4
The 35 × 325 mm slot is designed for DIN C4 in landscape format. Larger letters can also be inserted without being folded. The mailbox complies with DIN EN 13724.
35 × 325 mm
DIN C4 landscape
DIN EN 13724
✓
Quiet operation for everyday use
The brushed stainless-steel inlet flaps are fitted with a noise-damping rubber seal. A mail-retaining latch supports controlled removal, while the doors open from left to right.
Rubber seal
Quiet insertion
Mail-retaining latch
Door opens left → right
▰
Robust plaster cover frame 25 × 58 mm
The plaster cover frame consists of a 25 × 58 mm stainless-steel angle profile made from 1.5 mm thick V2A 1.4301. Powder-coated in the RAL colour, it forms a clear, robust finish between the mailbox system and the façade.
25 × 58 mm angle profile
1.5 mm stainless steel V2A
Powder-coated
Integrated flush-mounted
Equipment and technical features
Material and mailbox
Configuration
1 mailbox
Mailbox housing
Steel, galvanised; RAL 7016 anthracite grey fine-structure matt
Inlet flaps
Stainless steel V2A 1.4301, 240-grit finish
Slot
35 × 325 mm, DIN C4 landscape
Standard
DIN EN 13724
NELLY design and operation
Labelling
Individual laser engraving in BML Lasercut font
Nameplate
Interchangeable nameplate under the inlet flap
Mail-retaining latch
Integrated per mailbox
Mail removal
Front access
Door opening
From left to right
Locking system
Depending on the chosen product configuration
Installation and construction
Installation type
Flush-mounted
Plaster cover frame
Stainless-steel angle profile 25 × 58 mm made from 1.5 mm stainless steel V2A 1.4301, powder-coated
Labelling surface
Upper plaster cover frame with individual laser engraving
Rain drip edge
Integrated into the construction
Manufacture
Made in Germany by Briefkasten Manufaktur Lippe