Single surface-mounted mailbox system BASIC – Edition NELLY – BI-Colour stainless steel / RAL 7016 anthracite grey
"Everything begins with longing." – Nelly Sachs
The Edition NELLY combines the proven BASIC mailbox technology with a distinctly more individual appearance. The mailbox body is made from galvanised steel and is powder-coated in RAL 7016 anthracite grey fine structure matt, while the insertion flaps are made from stainless steel V2A 1.4301 with a 240-grit brushed finish. This deliberate BI-Colour contrast appears modern and high-quality and can be combined with many front doors, windows and façades. As a surface-mounted version with 1 mailbox, NELLY is not only intended for mail collection but as a neatly designed element of the entrance area. The flush-fitting side cladding with weather protection hood visually frames the unit and at the same time provides the surface for the characteristic NELLY nameplate panel.
The special advantages of the Edition NELLY
✦
NELLY nameplate panel – house number and street name
The distinctive NELLY detail is the mounted nameplate panel on the weather protection hood. It is personalised with your individual laser engraving and turns the mailbox unit into a personal element of the entrance area – house number and street name are clearly integrated into the overall design.
Individual laser engraving
House number & street name
Mounted nameplate panel
BML Lasercut
◆
BI-Colour: RAL 7016 meets brushed stainless steel
The mailbox body made from galvanised steel is powder-coated in RAL 7016 anthracite grey fine structure matt. The insertion flaps, by contrast, are made from stainless steel V2A 1.4301 and are finished with a 240-grit brush. The weather protection hood and side cladding are also made from stainless steel V2A and powder-coated.
RAL 7016 fine structure matt
Galvanised steel
V2A 1.4301
240-grit brushed finish
✉
Large insertion for DIN C4
The 35 × 325 mm insertion opening is designed for DIN C4 in landscape format. Larger letters can also be inserted without folding. The mailbox version complies with DIN EN 13724.
35 × 325 mm
DIN C4 landscape
DIN EN 13724
✓
Quiet operation in everyday use
The brushed stainless steel insertion flaps are fitted with a noise-damping rubber seal. A mail retention bar supports controlled removal, while the doors open from left to right.
Rubber seal
Quiet insertion
Mail retention bar
Door opening left → right
▰
Robust 1.5 mm stainless steel cladding
The weather protection hood and side cladding are made from 1.5 mm thick stainless steel V2A 1.4301 and powder-coated. This gives the surface-mounted unit a neatly framed, robust construction and additionally protects the mailbox unit in daily use.
1.5 mm stainless steel V2A
Weather protection hood
Side cladding
Powder-coated
Equipment and technical features
Material and mailbox
Configuration
1 mailbox
Mailbox body
Steel, galvanised; RAL 7016 anthracite grey fine structure matt
Insertion flaps
Stainless steel V2A 1.4301, 240-grit brushed finish
Insertion opening
35 × 325 mm, DIN C4 landscape
Standard
DIN EN 13724
NELLY design and operation
Labelling
Individual laser engraving in BML Lasercut lettering
Nameplate
Interchangeable nameplate under the insertion flap
Mail retention bar
Integrated per mailbox
Mail removal
From the front
Door opening
From left to right
Locking system
Depending on the chosen product configuration
Installation and construction
Type of installation
Surface-mounted wall installation
Cladding
Weather protection hood + side cladding made from 1.5 mm stainless steel V2A 1.4301, powder-coated
Nameplate panel
Mounted panel on the weather protection hood with individual laser engraving
Installation
Mounting rail including fixings for wall installation
Manufacture
Made in Germany by Briefkasten Manufaktur Lippe