Schneider Intercom × Briefkasten Manufaktur — clean integration of CM1 and LSM
Selected mailbox systems can be factory-prepared for Schneider Intercom CM1 and LSM. Precise metalworking creates a clear front — however, a complete intercom solution only arises from compatible system components, cabling, configuration and professional commissioning.

What BML prepares for Schneider Intercom
The front is manufactured with the intended cut-outs and mounts for the CM1 camera module and the LSM speaker module. Depending on the product family, preparation is possible for surface-mounted, flush-mounted or freestanding installations.
Important is the system boundary: CM1 and LSM alone do not form a complete video door intercom system. Additional Schneider components and a coordinated infrastructure are required for operation and communication. Doorbell buttons, door release, indoor station, network or building cabling must also be defined per project.
- Define component list bindingly before approving the front
- Check camera coverage and operating height at the actual site
- Coordinate cable routes, central modules and door release mechanisms
- Plan installation and commissioning by suitable specialist companies

What do Schneider CM1 and LSM do?
| Component | Function | Current characteristics | System dependency |
|---|---|---|---|
| CM1 | Camera module for the entrance area. | WDR, very wide field of view, lens correction; the front is designed for external use when installed. | Connected to Schneider im6 via HS-Link; manufacturer specifies up to three metres cable length. |
| LSM | Speaker module for voice playback and signalling. | Designed for high intelligibility and flexible separate or stacked arrangements. | Designed to operate with Schneider im3 or im6; performance depends on system configuration. |
| Total system | Call, audio, video, control and door release. | Composed of modules, buttons, central equipment, end devices and software. | Must be planned, wired, configured and tested on a project-specific basis. |
Why factory preparation makes sense
Precisely fitted front
Cut-outs and mounts are already aligned in production to the planned components.
Understated design
Mailbox, doorbell, camera and speaker appear as a unified entrance area.
Clear interfaces
Metalwork and system technology can be coordinated before ordering based on a defined configuration.
Which mailbox series are suitable?
Preparations are possible, among others, in selected variants of the GRIMM, GOETHE and BASIC series. Which front, number of compartments and installation type can be realised depends on available space, component spacing and project configuration.
- Flush-mounted for a flush, architecturally calm solution
- Surface-mounted for a clearly defined wall installation
- Freestanding for communication at a path or property boundary
- Letter and parcel compartments can be combined depending on the series
- RAL colour, labelling and house number can be coordinated together
Planning checklist for Schneider Intercom in the mailbox
- Define usage: Determine number of units, call targets, video, access and door release.
- Specify system components: Plan CM1 and LSM together with im3, im6 and other required modules.
- Approve the front: Confirm positions, spacing, labelling and installation height bindingly.
- Coordinate cabling: Check HS-Link lengths, power supply, door release and building infrastructure.
- Assess the environment: Take into account backlight, detection area, weather, acoustics and accessibility.
- Set data protection: Review image area, functions, permissions and local requirements.
- Coordinate trades: Assign metalwork, electrical, intercom specialist and site management clearly.
Separate preparation, components and commissioning
For customised mailbox products, “preparation” can mean a cut-out, a mount or a suitable front geometry. That does not automatically imply that camera, speaker, control, licences or installation services are included.
For a reliable offer, three lists should therefore be reconciled: the scope of supply of the mailbox system, the Schneider parts list and the services of the installing specialist company. Only this separation prevents gaps at the interfaces.
Mailbox solutions as a project basis
These products are examples of fronts that can be prepared individually. Schneider compatibility and the scope of delivery must be confirmed for the specific variant.
GOETHE with customised preparation
Flush-mounted mailbox front as a basis for project-specific intercom integration.
View product
GRIMM with customised preparation
Design-oriented front with a plannable mounting for customer-specific technology.
View product
GOETHE XXL with customised preparation
Letter and parcel reception with additional installation space for coordinated door communication.
View productFrequently asked questions
What is Schneider Intercom CM1?
CM1 is a camera module for Schneider Intercom systems. It is operated within a suitable system architecture and can be integrated into a prepared mailbox front.
What is the Schneider LSM?
LSM is a speaker module intended for operation with Schneider im3 or im6 and can be arranged separately or together with other modules.
Are CM1 and LSM together a complete door intercom system?
No. A functioning solution requires additional system components, cabling, configuration, end devices and possibly a door release.
Which BML series can be prepared?
Depending on the variant, individual preparations are possible among others in selected GRIMM, GOETHE and BASIC solutions.
Is the Schneider technology included in the product price?
Not automatically. Preparation, components and installation services can be separate items. The decisive factor is the concrete scope of delivery.
Can Schneider Intercom be integrated into a freestanding column?
Yes, with a suitable series and confirmed project configuration, preparation can also be provided in freestanding solutions.
What must be finalised before ordering?
A binding component list, installation positions, cable routes, system architecture, desired functions and the assignment of the executing trades are required.
Does data protection need to be checked for the camera?
Yes. The detection area, public space, functions, access rights and any notification obligations must be assessed for the specific location.
Request Schneider Intercom as a project solution
A clean integration starts with the coordinated component list. BML front, Schneider system and installation should be brought together before production approval.
